target/linux/ramips/dts/rt3050_dlink_dir-615-d.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-615-d", "ralink,rt3050-soc";
  10         model = "D-Link DIR-615 D";
  11
  12         aliases {
  13                 led-boot = &led_status_green;
  14                 led-failsafe = &led_status_green;
  15                 led-running = &led_status_green;
  16                 led-upgrade = &led_status_green;
  17                 label-mac-device = &wmac;
  18         };
  19
  20         cfi@1f000000 {
  21                 compatible = "cfi-flash";
  22                 reg = <0x1f000000 0x800000>;
  23                 bank-width = <2>;
  24                 device-width = <2>;
  25
  26                 partitions {
  27                         compatible = "fixed-partitions";
  28                         #address-cells = <1>;
  29                         #size-cells = <1>;
  30
  31                         partition@0 {
  32                                 label = "u-boot";
  33                                 reg = <0x0 0x30000>;
  34                                 read-only;
  35                         };
  36
  37                         devdata: partition@30000 {
  38                                 label = "devdata";
  39                                 reg = <0x30000 0x10000>;
  40                                 read-only;
  41                         };
  42
  43                         partition@40000 {
  44                                 label = "devconf";
  45                                 reg = <0x40000 0x10000>;
  46                                 read-only;
  47                         };
  48
  49                         partition@50000 {
  50                                 compatible = "denx,uimage";
  51                                 label = "firmware";
  52                                 reg = <0x50000 0x3b0000>;
  53                         };
  54                 };
  55         };
  56
  57         keys {
  58                 compatible = "gpio-keys-polled";
  59                 poll-interval = <20>;
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  64                         linux,code = <KEY_RESTART>;
  65                 };
  66
  67                 wps {
  68                         label = "wps";
  69                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_WPS_BUTTON>;
  71                 };
  72         };
  73
  74         leds {
  75                 compatible = "gpio-leds";
  76
  77                 status {
  78                         label = "dir-615-d:amber:status";
  79                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  80                 };
  81
  82                 led_status_green: status2 {
  83                         label = "dir-615-d:green:status";
  84                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  85                         default-state = "on";
  86                 };
  87
  88                 wan {
  89                         label = "dir-615-d:amber:wan";
  90                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  91                 };
  92
  93                 wan2 {
  94                         label = "dir-615-d:green:wan";
  95                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  96                 };
  97
  98                 wps {
  99                         label = "dir-615-d:blue:wps";
 100                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 101                 };
 102         };
 103 };
 104
 105 &esw {
 106         mediatek,portmap = <0x2f>;
 107 };
 108
 109 &wmac {
 110         ralink,mtd-eeprom = <&devdata 0x4000>;
 111 };
 112
 113 &state_default {
 114         gpio {
 115                 groups = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
 116                 function = "gpio";
 117         };
 118 };