target/linux/ramips/dts/rt3050_dlink_dir-300-b1.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-300-b1", "ralink,rt3050-soc";
  10         model = "D-Link DIR-300 B1";
  11
  12         aliases {
  13                 led-boot = &led_status_green;
  14                 led-failsafe = &led_status_green;
  15                 led-running = &led_status_green;
  16                 led-upgrade = &led_status_green;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         devdata: partition@30000 {
  37                                 label = "devdata";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         partition@40000 {
  43                                 label = "devconf";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 compatible = "denx,uimage";
  50                                 label = "firmware";
  51                                 reg = <0x50000 0x3b0000>;
  52                         };
  53                 };
  54         };
  55
  56         keys {
  57                 compatible = "gpio-keys-polled";
  58                 poll-interval = <20>;
  59
  60                 reset {
  61                         label = "reset";
  62                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  63                         linux,code = <KEY_RESTART>;
  64                 };
  65
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  69                         linux,code = <KEY_WPS_BUTTON>;
  70                 };
  71         };
  72
  73         leds {
  74                 compatible = "gpio-leds";
  75
  76                 status {
  77                         label = "dir-300-b1:amber:status";
  78                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 led_status_green: status2 {
  82                         label = "dir-300-b1:green:status";
  83                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 wan {
  87                         label = "dir-300-b1:amber:wan";
  88                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  89                 };
  90
  91                 wan2 {
  92                         label = "dir-300-b1:green:wan";
  93                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 wps {
  97                         label = "dir-300-b1:blue:wps";
  98                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  99                 };
 100         };
 101 };
 102
 103 &state_default {
 104         gpio {
 105                 groups = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
 106                 function = "gpio";
 107         };
 108 };
 109
 110 &ethernet {
 111         mtd-mac-address = <&devdata 0x4004>;
 112 };
 113
 114 &esw {
 115         mediatek,portmap = <0x2f>;
 116 };
 117
 118 &wmac {
 119         ralink,mtd-eeprom = <&devdata 0x4000>;
 120 };