target/linux/ramips/dts/rt3050_dlink_dcs-930.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dcs-930", "ralink,rt3050-soc";
  10         model = "D-Link DCS-930";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x400000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "u-boot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 compatible = "denx,uimage";
  50                                 label = "firmware";
  51                                 reg = <0x50000 0x3b0000>;
  52                         };
  53                 };
  54         };
  55
  56         leds {
  57                 compatible = "gpio-leds";
  58
  59                 wifi {
  60                         label = "dcs-930:red:alert";
  61                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 led_status: status {
  65                         label = "dcs-930:green:status";
  66                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 wps {
  70                         label = "dcs-930:blue:wps";
  71                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  72                 };
  73         };
  74
  75         keys {
  76                 compatible = "gpio-keys-polled";
  77                 poll-interval = <20>;
  78
  79                 wps {
  80                         label = "wps";
  81                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  82                         linux,code = <BTN_1>;
  83                 };
  84
  85                 reset {
  86                         label = "reset";
  87                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  88                         linux,code = <KEY_RESTART>;
  89                 };
  90         };
  91 };
  92
  93 &pinctrl {
  94         state_default: pinctrl0 {
  95                 gpio {
  96                         ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  97                         ralink,function = "gpio";
  98                 };
  99         };
 100 };
 101
 102 &ethernet {
 103         mtd-mac-address = <&factory 0x4>;
 104 };
 105
 106 &esw {
 107         mediatek,portmap = <0x2f>;
 108 };
 109
 110 &wmac {
 111         ralink,mtd-eeprom = <&factory 0>;
 112 };
 113
 114 &otg {
 115         status = "okay";
 116 };