target/linux/ramips/dts/rt2880_buffalo_wli-tx4-ag300n.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11         compatible = "buffalo,wli-tx4-ag300n", "ralink,rt2880-soc";
  12         model = "Buffalo WLI-TX4-AG300N";
  13
  14         aliases {
  15                 led-boot = &led_power;
  16                 led-failsafe = &led_power;
  17                 led-running = &led_power;
  18                 led-upgrade = &led_power;
  19         };
  20
  21         cfi@1f000000 {
  22                 compatible = "cfi-flash";
  23                 reg = <0x1f000000 0x800000>;
  24                 bank-width = <2>;
  25                 device-width = <2>;
  26
  27                 partitions {
  28                         compatible = "fixed-partitions";
  29                         #address-cells = <1>;
  30                         #size-cells = <1>;
  31
  32                         partition@0 {
  33                                 label = "uboot";
  34                                 reg = <0x0 0x30000>;
  35                                 read-only;
  36                         };
  37
  38                         partition@30000 {
  39                                 label = "uboot-env";
  40                                 reg = <0x30000 0x10000>;
  41                                 read-only;
  42                         };
  43
  44                         factory: partition@40000 {
  45                                 label = "factory";
  46                                 reg = <0x40000 0x10000>;
  47                                 read-only;
  48                         };
  49
  50                         partition@50000 {
  51                                 compatible = "denx,uimage";
  52                                 label = "firmware";
  53                                 reg = <0x50000 0x3b0000>;
  54                         };
  55                 };
  56         };
  57
  58         keys {
  59                 compatible = "gpio-keys-polled";
  60                 poll-interval = <100>;
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67
  68                 bandwidth {
  69                         label = "bandwidth";
  70                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73
  74                 reset {
  75                         label = "reset";
  76                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_RESTART>;
  78                 };
  79         };
  80
  81         leds {
  82                 compatible = "gpio-leds";
  83
  84                 diag {
  85                         label = "wli-tx4-ag300n:red:diag";
  86                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  87                 };
  88
  89                 led_power: power {
  90                         label = "wli-tx4-ag300n:blue:power";
  91                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  92                 };
  93
  94                 security {
  95                         label = "wli-tx4-ag300n:blue:security";
  96                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  97                 };
  98         };
  99 };
 100
 101 &gpio0 {
 102         status = "okay";
 103 };
 104
 105 &ethernet {
 106         status = "okay";
 107         mtd-mac-address = <&factory 0x4>;
 108
 109         port@0 {
 110                 mediatek,fixed-link = <100 1 1 1>;
 111         };
 112
 113         mdio-bus {
 114                 status = "okay";
 115
 116                 phy0: ethernet-phy@0 {
 117                         phy-mode = "mii";
 118                         reg = <0>;
 119                 };
 120         };
 121 };
 122
 123 &wmac {
 124         ralink,mtd-eeprom = <&factory 0>;
 125 };