target/linux/ramips/dts/rt2880_belkin_f5d8235-v1.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11         compatible = "belkin,f5d8235-v1", "ralink,rt2880-soc";
  12         model = "Belkin F5D8235 v1";
  13
  14         aliases {
  15                 led-boot = &led_wired_blue;
  16                 led-failsafe = &led_wired_blue;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0xbc400000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "uboot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "uboot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@50000 {
  49                                 compatible = "denx,uimage";
  50                                 label = "firmware";
  51                                 reg = <0x50000 0x7b0000>;
  52                         };
  53                 };
  54         };
  55
  56         rtl8366s {
  57                 compatible = "realtek,rtl8366s";
  58                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  59                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  60
  61                 realtek,initvals = <
  62                         0x0242 0x02BF
  63                         0x0245 0x02BF
  64                         0x0248 0x02BF
  65                         0x024B 0x02BF
  66                         0x024E 0x02BF
  67                         0x0251 0x02BF
  68                         0x0254 0x0A3F
  69                         0x0256 0x0A3F
  70                         0x0258 0x0A3F
  71                         0x025A 0x0A3F
  72                         0x025C 0x0A3F
  73                         0x025E 0x0A3F
  74                         0x0263 0x007C
  75                         0x0100 0x0004
  76                         0xBE5B 0x3500
  77                         0x800E 0x200F
  78                         0xBE1D 0x0F00
  79                         0x8001 0x5011
  80                         0x800A 0xA2F4
  81                         0x800B 0x17A3
  82                         0xBE4B 0x17A3
  83                         0xBE41 0x5011
  84                         0xBE17 0x2100
  85                         0x8000 0x8304
  86                         0xBE40 0x8304
  87                         0xBE4A 0xA2F4
  88                         0x800C 0xA8D5
  89                         0x8014 0x5500
  90                         0x8015 0x0004
  91                         0xBE4C 0xA8D5
  92                         0xBE59 0x0008
  93                         0xBE09 0x0E00
  94                         0xBE36 0x1036
  95                         0xBE37 0x1036
  96                         0x800D 0x00FF
  97                         0xBE4D 0x00FF
  98                 >;
  99
 100                 realtek,green-ethernet-features;
 101         };
 102
 103         keys {
 104                 compatible = "gpio-keys-polled";
 105                 poll-interval = <100>;
 106
 107                 wps {
 108                         label = "wps";
 109                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_WPS_BUTTON>;
 111                 };
 112
 113                 reset {
 114                         label = "reset";
 115                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 116                         linux,code = <KEY_RESTART>;
 117                 };
 118         };
 119
 120         leds {
 121                 compatible = "gpio-leds";
 122
 123                 internet {
 124                         label = "f5d8235-v1:blue:internet";
 125                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 126                 };
 127
 128                 internet2 {
 129                         label = "f5d8235-v1:amber:internet";
 130                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 131                 };
 132
 133                 modem {
 134                         label = "f5d8235-v1:blue:modem";
 135                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 136                 };
 137
 138                 modem2 {
 139                         label = "f5d8235-v1:amber:modem";
 140                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 141                 };
 142
 143                 router {
 144                         label = "f5d8235-v1:blue:router";
 145                         gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 146                 };
 147
 148                 storage {
 149                         label = "f5d8235-v1:blue:storage";
 150                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 151                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
 152                         linux,default-trigger = "usbport";
 153                 };
 154
 155                 storage2 {
 156                         label = "f5d8235-v1:amber:storage";
 157                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 158                 };
 159
 160                 security {
 161                         label = "f5d8235-v1:blue:security";
 162                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 163                 };
 164
 165                 security2 {
 166                         label = "f5d8235-v1:amber:security";
 167                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 168                 };
 169
 170                 led_wired_blue: wired {
 171                         label = "f5d8235-v1:blue:wired";
 172                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 173                 };
 174
 175                 wired2 {
 176                         label = "f5d8235-v1:amber:wired";
 177                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 178                 };
 179
 180                 wireless {
 181                         label = "f5d8235-v1:blue:wireless";
 182                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 183                 };
 184
 185                 wireless2 {
 186                         label = "f5d8235-v1:amber:wireless";
 187                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
 188                 };
 189         };
 190 };
 191
 192 &gpio0 {
 193         status = "okay";
 194 };
 195
 196 &state_default {
 197         gpio {
 198                 groups = "spi", "i2c", "jtag", "mdio", "uartlite";
 199                 function = "gpio";
 200         };
 201 };
 202
 203 &ethernet {
 204         status = "okay";
 205         mtd-mac-address = <&factory 0x4>;
 206
 207         port@0 {
 208                 mediatek,fixed-link = <1000 1 1 1>;
 209         };
 210 };
 211
 212 &pci {
 213         status = "okay";
 214
 215         usb@11,0 {
 216                 #address-cells = <1>;
 217                 #size-cells = <0>;
 218                 compatible = "pci1033,0035";
 219                 reg = <0x8800 0 0 0 0>;
 220
 221                 ohci_port1: port@1 {
 222                         reg = <1>;
 223                         #trigger-source-cells = <0>;
 224                 };
 225         };
 226
 227         usb@11,1 {
 228                 #address-cells = <1>;
 229                 #size-cells = <0>;
 230                 compatible = "pci1033,00e0";
 231                 reg = <0x8900 0 0 0 0>;
 232
 233                 ehci_port1: port@1 {
 234                         reg = <1>;
 235                         #trigger-source-cells = <0>;
 236                 };
 237         };
 238 };
 239
 240 &wmac {
 241         status = "okay";
 242         ralink,mtd-eeprom = <&factory 0x0>;
 243 };