target/linux/ramips/dts/rt2880_asus_rt-n15.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11         compatible = "asus,rt-n15", "ralink,rt2880-soc";
  12         model = "Asus RT-N15";
  13
  14         aliases {
  15                 led-boot = &led_power;
  16                 led-failsafe = &led_power;
  17                 led-running = &led_power;
  18                 led-upgrade = &led_power;
  19         };
  20
  21         cfi@1f000000 {
  22                 compatible = "cfi-flash";
  23                 reg = <0x1f000000 0x800000>;
  24                 bank-width = <2>;
  25                 device-width = <2>;
  26
  27                 partitions {
  28                         compatible = "fixed-partitions";
  29                         #address-cells = <1>;
  30                         #size-cells = <1>;
  31
  32                         partition@0 {
  33                                 label = "uboot";
  34                                 reg = <0x0 0x30000>;
  35                                 read-only;
  36                         };
  37
  38                         partition@30000 {
  39                                 label = "uboot-env";
  40                                 reg = <0x30000 0x10000>;
  41                                 read-only;
  42                         };
  43
  44                         factory: partition@40000 {
  45                                 label = "factory";
  46                                 reg = <0x40000 0x10000>;
  47                                 read-only;
  48                         };
  49
  50                         partition@50000 {
  51                                 compatible = "denx,uimage";
  52                                 label = "firmware";
  53                                 reg = <0x50000 0x3b0000>;
  54                         };
  55                 };
  56         };
  57
  58         rtl8366s {
  59                 compatible = "realtek,rtl8366s";
  60                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  61                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys-polled";
  66                 poll-interval = <100>;
  67
  68                 wps {
  69                         label = "wps";
  70                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  71                         linux,code = <KEY_WPS_BUTTON>;
  72                 };
  73
  74                 reset {
  75                         label = "reset";
  76                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  77                         linux,code = <KEY_RESTART>;
  78                 };
  79         };
  80
  81         leds {
  82                 compatible = "gpio-leds";
  83
  84                 led_power: power {
  85                         label = "rt-n15:blue:power";
  86                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  87                 };
  88         };
  89 };
  90
  91 &gpio0 {
  92         status = "okay";
  93 };
  94
  95 &pinctrl {
  96         state_default: pinctrl0 {
  97                 gpio {
  98                         ralink,group = "i2c", "uartlite", "mdio";
  99                         ralink,function = "gpio";
 100                 };
 101         };
 102 };
 103
 104 &ethernet {
 105         status = "okay";
 106         mtd-mac-address = <&factory 0x4>;
 107
 108         port@0 {
 109                 mediatek,fixed-link = <1000 1 1 1>;
 110         };
 111
 112         mdio-bus {
 113                 status = "okay";
 114
 115                 phy0: ethernet-phy@0 {
 116                         phy-mode = "mii";
 117                         reg = <0>;
 118                 };
 119         };
 120 };
 121
 122 &wmac {
 123         ralink,mtd-eeprom = <&factory 0>;
 124 };