target/linux/ramips/dts/mt7628an_zyxel_keenetic-extra-ii.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
  10         model = "ZyXEL Keenetic Extra II";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600n8";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys-polled";
  25                 poll-interval = <20>;
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32
  33                 wps {
  34                         label = "wps";
  35                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                 };
  38
  39                 fn {
  40                         label = "fn";
  41                         gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
  42                         linux,code = <BTN_0>;
  43                 };
  44         };
  45
  46         leds {
  47                 compatible = "gpio-leds";
  48
  49                 led_power: power {
  50                         label = "keenetic-extra-ii:green:power";
  51                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  52                         default-state = "keep";
  53                 };
  54
  55                 internet {
  56                         label = "keenetic-extra-ii:green:internet";
  57                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 wifi {
  61                         label = "keenetic-extra-ii:green:wifi";
  62                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 usb {
  66                         label = "keenetic-extra-ii:green:usb";
  67                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  68                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  69                         linux,default-trigger = "usbport";
  70                 };
  71         };
  72
  73         gpio_export {
  74                 compatible = "gpio-export";
  75                 #size-cells = <0>;
  76
  77                 usbpower {
  78                         gpio-export,name = "usbpower";
  79                         gpio-export,output = <1>;
  80                         gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
  81                 };
  82         };
  83 };
  84
  85 &spi0 {
  86         status = "okay";
  87
  88         m25p80@0 {
  89                 compatible = "jedec,spi-nor";
  90                 reg = <0>;
  91                 spi-max-frequency = <10000000>;
  92
  93                 partitions {
  94                         compatible = "fixed-partitions";
  95                         #address-cells = <1>;
  96                         #size-cells = <1>;
  97
  98                         partition@0 {
  99                                 label = "u-boot";
 100                                 reg = <0x0 0x30000>;
 101                                 read-only;
 102                         };
 103
 104                         partition@30000 {
 105                                 label = "u-config";
 106                                 reg = <0x30000 0x10000>;
 107                                 read-only;
 108                         };
 109
 110                         factory: partition@40000 {
 111                                 label = "rf-eeprom";
 112                                 reg = <0x40000 0x10000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@50000 {
 117                                 compatible = "denx,uimage";
 118                                 label = "firmware";
 119                                 reg = <0x50000 0xe90000>;
 120                         };
 121
 122                         partition@ee0000 {
 123                                 label = "config_1";
 124                                 reg = <0xee0000 0x10000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@ef0000 {
 129                                 label = "storage";
 130                                 reg = <0xef0000 0x100000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@ff0000 {
 135                                 label = "dump";
 136                                 reg = <0xff0000 0x10000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@1000000 {
 141                                 label = "u-state";
 142                                 reg = <0x1000000 0x30000>;
 143                                 read-only;
 144                         };
 145
 146                         partition@1030000 {
 147                                 label = "u-config_res";
 148                                 reg = <0x1030000 0x10000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@1040000 {
 153                                 label = "rf-eeprom_res";
 154                                 reg = <0x1040000 0x10000>;
 155                                 read-only;
 156                         };
 157
 158                         partition@1050000 {
 159                                 label = "firmware_2";
 160                                 reg = <0x1050000 0xe90000>;
 161                                 read-only;
 162                         };
 163
 164                         partition@1ee0000 {
 165                                 label = "config_2";
 166                                 reg = <0x1ee0000 0x10000>;
 167                                 read-only;
 168                         };
 169                 };
 170         };
 171 };
 172
 173 &ehci {
 174         status = "okay";
 175 };
 176
 177 &ohci {
 178         status = "okay";
 179 };
 180
 181 &ethernet {
 182         mtd-mac-address = <&factory 0x4>;
 183         mediatek,portmap = "wllll";
 184 };
 185
 186 &wmac {
 187         status = "okay";
 188         mediatek,mtd-eeprom = <&factory 0x0>;
 189 };
 190
 191 &pcie {
 192         status = "okay";
 193 };
 194
 195 &pcie0 {
 196         mt76@0,0 {
 197                 reg = <0x0000 0 0 0 0>;
 198                 mediatek,mtd-eeprom = <&factory 0x8000>;
 199                 ieee80211-freq-limit = <5000000 6000000>;
 200                 mtd-mac-address = <&factory 0x8004>;
 201         };
 202 };
 203
 204 &pinctrl {
 205         state_default: pinctrl0 {
 206                 gpio {
 207                         ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an";
 208                         ralink,function = "gpio";
 209                 };
 210         };
 211 };