target/linux/ramips/dts/mt7628an_zbtlink_zbt-we1226.dts

   1 /dts-v1/;
   2 #include <dt-bindings/input/input.h>
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "mt7628an.dtsi"
   6
   7 / {
   8         compatible = "zbtlink,zbt-we1226", "mediatek,mt7628an-soc";
   9         model = "Zbtlink ZBT-WE1226";
  10
  11         aliases {
  12                 led-boot = &led_wlan;
  13                 led-failsafe = &led_wlan;
  14                 led-running = &led_wlan;
  15                 led-upgrade = &led_wlan;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  28                         linux,code = <KEY_RESTART>;
  29                 };
  30         };
  31
  32         leds {
  33                 compatible = "gpio-leds";
  34
  35                 wan {
  36                         label = "zbt-we1226:green:wan";
  37                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 lan1 {
  41                         label = "zbt-we1226:green:lan1";
  42                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 lan2 {
  46                         label = "zbt-we1226:green:lan2";
  47                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 led_wlan: wlan {
  51                         label = "zbt-we1226:green:wlan";
  52                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55 };
  56
  57 &pinctrl {
  58         state_default: pinctrl0 {
  59                 gpio {
  60                         ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
  61                         ralink,function = "gpio";
  62                 };
  63         };
  64 };
  65
  66 &spi0 {
  67         status = "okay";
  68
  69         m25p80@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <10000000>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         partition@0 {
  80                                 label = "u-boot";
  81                                 reg = <0x0 0x30000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@30000 {
  86                                 label = "u-boot-env";
  87                                 reg = <0x30000 0x10000>;
  88                                 read-only;
  89                         };
  90
  91                         factory: partition@40000 {
  92                                 label = "factory";
  93                                 reg = <0x40000 0x10000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@50000 {
  98                                 compatible = "denx,uimage";
  99                                 label = "firmware";
 100                                 reg = <0x50000 0x7b0000>;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &wmac {
 107         status = "okay";
 108         ralink,mtd-eeprom = <&factory 0x4>;
 109 };
 110
 111 &ethernet {
 112         mtd-mac-address = <&factory 0x2e>;
 113         mediatek,portmap = "llllw";
 114 };