ramips: clean and improve MAC address setup in 02_network
[oweals/openwrt.git] / target / linux / ramips / dts / mt7628an_xiaomi_miwifi-nano.dts
1 /dts-v1/;
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc";
10         model = "MiWiFi Nano";
11
12         aliases {
13                 led-boot = &led_blue;
14                 led-failsafe = &led_blue;
15                 led-running = &led_blue;
16                 led-upgrade = &led_blue;
17         };
18
19         chosen {
20                 bootargs = "console=ttyS0,115200";
21         };
22
23         leds {
24                 compatible = "gpio-leds";
25
26                 led_blue: status_blue {
27                         label = "miwifi-nano:blue:status";
28                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
29                 };
30                 status_red {
31                         label = "miwifi-nano:red:status";
32                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
33                 };
34                 status_amber {
35                         label = "miwifi-nano:amber:status";
36                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
37                 };
38         };
39
40         keys {
41                 compatible = "gpio-keys-polled";
42                 poll-interval = <20>;
43
44                 reset {
45                         label = "reset";
46                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
47                         linux,code = <KEY_RESTART>;
48                 };
49         };
50 };
51
52 &pinctrl {
53         state_default: pinctrl0 {
54                 gpio {
55                         ralink,group = "gpio", "refclk", "wdt", "wled_an";
56                         ralink,function = "gpio";
57                 };
58         };
59 };
60
61 &ehci {
62         status = "disabled";
63 };
64
65 &ohci {
66         status = "disabled";
67 };
68
69 &wmac {
70         status = "okay";
71         ralink,mtd-eeprom = <&factory 0x4>;
72 };
73
74 &ethernet {
75         mtd-mac-address = <&factory 0x28>;
76 };
77
78 &spi0 {
79         status = "okay";
80
81         m25p80@0 {
82                 compatible = "jedec,spi-nor";
83                 reg = <0>;
84                 spi-max-frequency = <40000000>;
85
86                 partitions {
87                         compatible = "fixed-partitions";
88                         #address-cells = <1>;
89                         #size-cells = <1>;
90
91                         partition@0 {
92                                 label = "u-boot";
93                                 reg = <0x0 0x30000>;
94                                 read-only;
95                         };
96
97                         partition@30000 {
98                                 label = "u-boot-env";
99                                 reg = <0x30000 0x10000>;
100                         };
101
102                         factory: partition@40000 {
103                                 label = "factory";
104                                 reg = <0x40000 0x10000>;
105                                 read-only;
106                         };
107
108                         partition@50000 {
109                                 compatible = "denx,uimage";
110                                 label = "firmware";
111                                 reg = <0x50000 0xfb0000>;
112                         };
113                 };
114         };
115 };