ramips: add support for TP-Link RE200 v1
[oweals/openwrt.git] / target / linux / ramips / dts / mt7628an_wiznet_wizfi630s.dts
1 //SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7628an.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10         compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
11         model = "WIZnet WizFi630S";
12
13         chosen {
14                 bootargs = "console=ttyS1,115200";
15         };
16
17         aliases {
18                 led-boot = &led_run;
19                 led-failsafe = &led_run;
20                 led-running = &led_run;
21                 led-upgrade = &led_run;
22                 serial0 = &uart1;
23                 serial1 = &uartlite;
24         };
25
26         leds {
27                 compatible = "gpio-leds";
28
29                 led_run: run {
30                         label = "wizfi630s:green:run";
31                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
32                 };
33
34                 ledwps {
35                         label = "wizfi630s:green:wps";
36                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
37                 };
38
39                 leduart1 {
40                         label = "wizfi630s:green:uart1";
41                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
42                 };
43
44                 leduart2 {
45                         label = "wizfi630s:green:uart2";
46                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
47                 };
48         };
49
50         keys {
51                 compatible = "gpio-keys";
52
53                 #address-cells = <1>;
54                 #size-cells = <0>;
55
56                 reset {
57                         label = "reset";
58                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
59                         linux,code = <KEY_RESTART>;
60                 };
61
62                 wps {
63                         label = "wps";
64                         gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
65                         linux,code = <KEY_WPS_BUTTON>;
66                 };
67
68                 scm1 {
69                         label = "SCM1";
70                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
71                         linux,code = <BTN_1>;
72                 };
73
74                 scm2 {
75                         label = "SCM2";
76                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
77                         linux,code = <BTN_2>;
78                 };
79         };
80 };
81
82 &state_default {
83         gpio {
84                 ralink,group = "gpio";
85                 ralink,function = "gpio";
86         };
87
88         i2s {
89                 ralink,group = "i2s";
90                 ralink,function = "gpio";
91         };
92
93         wdt {
94                 ralink,group = "wdt";
95                 ralink,function = "gpio";
96         };
97
98         i2c {
99                 ralink,group = "i2c";
100                 ralink,function = "gpio";
101         };
102
103         refclk {
104                 ralink,group = "refclk";
105                 ralink,function = "gpio";
106         };
107 };
108
109 &wmac {
110         status = "okay";
111 };
112
113 &spi0 {
114         status = "okay";
115
116         pinctrl-names = "default";
117         pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
118
119         flash@0 {
120                 compatible = "jedec,spi-nor";
121                 reg = <0>;
122                 spi-max-frequency = <40000000>;
123                 m25p,chunked-io = <31>;
124
125                 partitions {
126                         compatible = "fixed-partitions";
127                         #address-cells = <1>;
128                         #size-cells = <1>;
129
130                         partition@0 {
131                                 label = "u-boot";
132                                 reg = <0x0 0x30000>;
133                                 read-only;
134                         };
135
136                         partition@30000 {
137                                 label = "u-boot-env";
138                                 reg = <0x30000 0x10000>;
139                                 read-only;
140                         };
141
142                         factory: partition@40000 {
143                                 label = "factory";
144                                 reg = <0x40000 0x10000>;
145                                 read-only;
146                         };
147
148                         partition@50000 {
149                                 compatible = "denx,uimage";
150                                 label = "firmware";
151                                 reg = <0x50000 0x1fb0000>;
152                         };
153                 };
154         };
155 };
156
157 &i2c {
158         status = "okay";
159 };
160
161 &uart1 {
162         status = "okay";
163 };
164
165 &pwm {
166         status = "okay";
167 };
168
169 &ethernet {
170         mtd-mac-address = <&factory 0x28>;
171 };
172
173 &esw {
174         mediatek,portmap = <0x3e>;
175 };
176
177 &sdhci {
178         status = "okay";
179         mediatek,cd-high;
180 };
181
182 &wmac {
183         status = "okay";
184 };