target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts

   1 //SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
  11         model = "WIZnet WizFi630S";
  12
  13         chosen {
  14                 bootargs = "console=ttyS1,115200";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_run;
  19                 led-failsafe = &led_run;
  20                 led-running = &led_run;
  21                 led-upgrade = &led_run;
  22                 serial0 = &uart1;
  23                 serial1 = &uartlite;
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28
  29                 led_run: run {
  30                         label = "wizfi630s:green:run";
  31                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 ledwps {
  35                         label = "wizfi630s:green:wps";
  36                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 leduart1 {
  40                         label = "wizfi630s:green:uart1";
  41                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 leduart2 {
  45                         label = "wizfi630s:green:uart2";
  46                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  47                 };
  48         };
  49
  50         keys {
  51                 compatible = "gpio-keys";
  52
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67
  68                 scm1 {
  69                         label = "SCM1";
  70                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  71                         linux,code = <BTN_1>;
  72                 };
  73
  74                 scm2 {
  75                         label = "SCM2";
  76                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  77                         linux,code = <BTN_2>;
  78                 };
  79         };
  80 };
  81
  82 &state_default {
  83         gpio {
  84                 ralink,group = "gpio";
  85                 ralink,function = "gpio";
  86         };
  87
  88         i2s {
  89                 ralink,group = "i2s";
  90                 ralink,function = "gpio";
  91         };
  92
  93         wdt {
  94                 ralink,group = "wdt";
  95                 ralink,function = "gpio";
  96         };
  97
  98         i2c {
  99                 ralink,group = "i2c";
 100                 ralink,function = "gpio";
 101         };
 102
 103         refclk {
 104                 ralink,group = "refclk";
 105                 ralink,function = "gpio";
 106         };
 107 };
 108
 109 &wmac {
 110         status = "okay";
 111 };
 112
 113 &spi0 {
 114         status = "okay";
 115
 116         pinctrl-names = "default";
 117         pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
 118
 119         flash@0 {
 120                 compatible = "jedec,spi-nor";
 121                 reg = <0>;
 122                 spi-max-frequency = <40000000>;
 123                 m25p,chunked-io = <31>;
 124
 125                 partitions {
 126                         compatible = "fixed-partitions";
 127                         #address-cells = <1>;
 128                         #size-cells = <1>;
 129
 130                         partition@0 {
 131                                 label = "u-boot";
 132                                 reg = <0x0 0x30000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@30000 {
 137                                 label = "u-boot-env";
 138                                 reg = <0x30000 0x10000>;
 139                                 read-only;
 140                         };
 141
 142                         factory: partition@40000 {
 143                                 label = "factory";
 144                                 reg = <0x40000 0x10000>;
 145                                 read-only;
 146                         };
 147
 148                         partition@50000 {
 149                                 compatible = "denx,uimage";
 150                                 label = "firmware";
 151                                 reg = <0x50000 0x1fb0000>;
 152                         };
 153                 };
 154         };
 155 };
 156
 157 &i2c {
 158         status = "okay";
 159 };
 160
 161 &uart1 {
 162         status = "okay";
 163 };
 164
 165 &pwm {
 166         status = "okay";
 167 };
 168
 169 &ethernet {
 170         mtd-mac-address = <&factory 0x28>;
 171 };
 172
 173 &esw {
 174         mediatek,portmap = <0x3e>;
 175 };
 176
 177 &sdhci {
 178         status = "okay";
 179         mediatek,cd-high;
 180 };
 181
 182 &wmac {
 183         status = "okay";
 184 };