target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts

   1 //SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "wiznet,wizfi630s", "mediatek,mt7628an-soc";
  11         model = "WIZnet WizFi630S";
  12
  13         chosen {
  14                 bootargs = "console=ttyS1,115200";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_run;
  19                 led-failsafe = &led_run;
  20                 led-running = &led_run;
  21                 led-upgrade = &led_run;
  22                 serial0 = &uart1;
  23                 serial1 = &uartlite;
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28
  29                 led_run: run {
  30                         label = "wizfi630s:green:run";
  31                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 ledwps {
  35                         label = "wizfi630s:green:wps";
  36                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 leduart1 {
  40                         label = "wizfi630s:green:uart1";
  41                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 leduart2 {
  45                         label = "wizfi630s:green:uart2";
  46                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  47                 };
  48         };
  49
  50         keys {
  51                 compatible = "gpio-keys";
  52
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
  65                         linux,code = <KEY_WPS_BUTTON>;
  66                 };
  67
  68                 scm1 {
  69                         label = "SCM1";
  70                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  71                         linux,code = <BTN_1>;
  72                 };
  73
  74                 scm2 {
  75                         label = "SCM2";
  76                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  77                         linux,code = <BTN_2>;
  78                 };
  79         };
  80 };
  81
  82 &pinctrl {
  83         state_default: pinctrl0 {
  84                 gpio {
  85                         ralink,group = "gpio";
  86                         ralink,function = "gpio";
  87                 };
  88
  89                 i2s {
  90                         ralink,group = "i2s";
  91                         ralink,function = "gpio";
  92                 };
  93
  94                 wdt {
  95                         ralink,group = "wdt";
  96                         ralink,function = "gpio";
  97                 };
  98
  99                 i2c {
 100                         ralink,group = "i2c";
 101                         ralink,function = "gpio";
 102                 };
 103
 104                 refclk {
 105                         ralink,group = "refclk";
 106                         ralink,function = "gpio";
 107                 };
 108         };
 109 };
 110
 111 &wmac {
 112         status = "okay";
 113 };
 114
 115 &spi0 {
 116         status = "okay";
 117
 118         pinctrl-names = "default";
 119         pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
 120
 121         flash@0 {
 122                 compatible = "jedec,spi-nor";
 123                 reg = <0>;
 124                 spi-max-frequency = <40000000>;
 125                 m25p,chunked-io = <31>;
 126
 127                 partitions {
 128                         compatible = "fixed-partitions";
 129                         #address-cells = <1>;
 130                         #size-cells = <1>;
 131
 132                         partition@0 {
 133                                 label = "u-boot";
 134                                 reg = <0x0 0x30000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@30000 {
 139                                 label = "u-boot-env";
 140                                 reg = <0x30000 0x10000>;
 141                                 read-only;
 142                         };
 143
 144                         factory: partition@40000 {
 145                                 label = "factory";
 146                                 reg = <0x40000 0x10000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@50000 {
 151                                 compatible = "denx,uimage";
 152                                 label = "firmware";
 153                                 reg = <0x50000 0x1fb0000>;
 154                         };
 155                 };
 156         };
 157 };
 158
 159 &i2c {
 160         status = "okay";
 161 };
 162
 163 &uart1 {
 164         status = "okay";
 165 };
 166
 167 &pwm {
 168         status = "okay";
 169 };
 170
 171 &ethernet {
 172         mtd-mac-address = <&factory 0x28>;
 173 };
 174
 175 &esw {
 176         mediatek,portmap = <0x3e>;
 177 };
 178
 179 &sdhci {
 180         status = "okay";
 181         mediatek,cd-high;
 182 };
 183
 184 &wmac {
 185         status = "okay";
 186 };