ramips: add support for XiaoYu XY-C5
[oweals/openwrt.git] / target / linux / ramips / dts / mt7628an_wavlink_wl-wn575a3.dts
1 /dts-v1/;
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/gpio/gpio.h>
4
5 #include "mt7628an.dtsi"
6
7 / {
8         compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
9         model = "Wavlink WL-WN575A3";
10
11         chosen {
12                 bootargs = "console=ttyS0,57600";
13         };
14
15         keys {
16                 compatible = "gpio-keys-polled";
17                 poll-interval = <20>;
18
19                 reset {
20                         label = "reset";
21                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
22                         linux,code = <KEY_RESTART>;
23                 };
24
25                 wps {
26                         label = "wps";
27                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
28                         linux,code = <KEY_WPS_BUTTON>;
29                 };
30         };
31
32         leds {
33                 compatible = "gpio-leds";
34
35                 wifi-high {
36                         label = "wl-wn575a3:green:wifi-high";
37                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
38                 };
39
40                 wifi-med {
41                         label = "wl-wn575a3:green:wifi-med";
42                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
43                 };
44
45                 wifi-low {
46                         label = "wl-wn575a3:green:wifi-low";
47                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
48                 };
49
50                 wps {
51                         label = "wl-wn575a3:green:wps";
52                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
53                 };
54         };
55 };
56
57 &pinctrl {
58         state_default: pinctrl0 {
59                 gpio {
60                         ralink,group = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an";
61                         ralink,function = "gpio";
62                 };
63         };
64 };
65
66 &pcie {
67         status = "okay";
68 };
69
70 &pcie0 {
71         mt76@0,0 {
72                 reg = <0x0000 0 0 0 0>;
73                 mediatek,mtd-eeprom = <&factory 0x8000>;
74                 ieee80211-freq-limit = <5000000 6000000>;
75         };
76 };
77
78 &spi0 {
79         status = "okay";
80
81         flash@0 {
82                 compatible = "jedec,spi-nor";
83                 reg = <0>;
84                 spi-max-frequency = <10000000>;
85
86                 partitions {
87                         compatible = "fixed-partitions";
88                         #address-cells = <1>;
89                         #size-cells = <1>;
90
91                         partition@0 {
92                                 label = "u-boot";
93                                 reg = <0x0 0x30000>;
94                                 read-only;
95                         };
96
97                         partition@30000 {
98                                 label = "u-boot-env";
99                                 reg = <0x30000 0x10000>;
100                                 read-only;
101                         };
102
103                         factory: partition@40000 {
104                                 label = "factory";
105                                 reg = <0x40000 0x10000>;
106                                 read-only;
107                         };
108
109                         partition@50000 {
110                                 compatible = "denx,uimage";
111                                 label = "firmware";
112                                 reg = <0x50000 0x7b0000>;
113                         };
114                 };
115         };
116 };
117
118 &wmac {
119         status = "okay";
120 };
121
122 &ethernet {
123         mtd-mac-address = <&factory 0x28>;
124         mediatek,portmap = "llllw";
125 };