target/linux/ramips/dts/mt7628an_wavlink_wl-wn575a3.dts

   1 /dts-v1/;
   2 #include <dt-bindings/input/input.h>
   3 #include <dt-bindings/gpio/gpio.h>
   4
   5 #include "mt7628an.dtsi"
   6
   7 / {
   8         compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc";
   9         model = "Wavlink WL-WN575A3";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,57600";
  13         };
  14
  15         keys {
  16                 compatible = "gpio-keys";
  17
  18                 reset {
  19                         label = "reset";
  20                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  21                         linux,code = <KEY_RESTART>;
  22                 };
  23
  24                 wps {
  25                         label = "wps";
  26                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_WPS_BUTTON>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 wifi-high {
  35                         label = "wl-wn575a3:green:wifi-high";
  36                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wifi-med {
  40                         label = "wl-wn575a3:green:wifi-med";
  41                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wifi-low {
  45                         label = "wl-wn575a3:green:wifi-low";
  46                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wps {
  50                         label = "wl-wn575a3:green:wps";
  51                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  52                 };
  53         };
  54 };
  55
  56 &pinctrl {
  57         state_default: pinctrl0 {
  58                 gpio {
  59                         ralink,group = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an";
  60                         ralink,function = "gpio";
  61                 };
  62         };
  63 };
  64
  65 &pcie {
  66         status = "okay";
  67 };
  68
  69 &pcie0 {
  70         mt76@0,0 {
  71                 reg = <0x0000 0 0 0 0>;
  72                 mediatek,mtd-eeprom = <&factory 0x8000>;
  73                 ieee80211-freq-limit = <5000000 6000000>;
  74         };
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <10000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x0 0x30000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@30000 {
  97                                 label = "u-boot-env";
  98                                 reg = <0x30000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         factory: partition@40000 {
 103                                 label = "factory";
 104                                 reg = <0x40000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@50000 {
 109                                 compatible = "denx,uimage";
 110                                 label = "firmware";
 111                                 reg = <0x50000 0x7b0000>;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &wmac {
 118         status = "okay";
 119 };
 120
 121 &ethernet {
 122         mtd-mac-address = <&factory 0x28>;
 123         mediatek,portmap = "llllw";
 124 };