ramips: replace pinctrl property names
[oweals/openwrt.git] / target / linux / ramips / dts / mt7628an_tplink_re305-v1.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7628an.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10         compatible = "tplink,re305-v1", "mediatek,mt7628an-soc";
11         model = "TP-Link RE305 v1";
12
13         aliases {
14                 led-boot = &led_power;
15                 led-failsafe = &led_power;
16                 led-running = &led_power;
17                 led-upgrade = &led_power;
18                 label-mac-device = &ethernet;
19         };
20
21         chosen {
22                 bootargs = "console=ttyS0,57600";
23         };
24
25         keys {
26                 compatible = "gpio-keys";
27
28                 reset {
29                         label = "reset";
30                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
31                         linux,code = <KEY_RESTART>;
32                 };
33
34                 wps {
35                         label = "wps";
36                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
37                         linux,code = <KEY_WPS_BUTTON>;
38                 };
39         };
40
41         leds {
42                 compatible = "gpio-leds";
43
44                 led_power: power {
45                         label = "re305-v1:blue:power";
46                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
47                 };
48
49                 wlan2g {
50                         label = "re305-v1:blue:wlan2g";
51                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
52                         linux,default-trigger = "phy0tpt";
53                 };
54
55                 wlan5g {
56                         label = "re305-v1:blue:wlan5g";
57                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
58                         linux,default-trigger = "phy1tpt";
59                 };
60
61                 rssi1 {
62                         label = "re305-v1:red:rssi";
63                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
64                 };
65
66                 rssi2 {
67                         label = "re305-v1:blue:rssi";
68                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
69                 };
70         };
71 };
72
73 &spi0 {
74         status = "okay";
75
76         flash@0 {
77                 compatible = "jedec,spi-nor";
78                 reg = <0>;
79                 spi-max-frequency = <50000000>;
80
81                 partitions {
82                         compatible = "fixed-partitions";
83                         #address-cells = <1>;
84                         #size-cells = <1>;
85
86                         partition@0 {
87                                 label = "u-boot";
88                                 reg = <0x0 0x20000>;
89                                 read-only;
90                         };
91
92                         partition@20000 {
93                                 compatible = "tplink,firmware";
94                                 label = "firmware";
95                                 reg = <0x20000 0x5e0000>;
96                         };
97
98                         config: partition@600000 {
99                                 label = "config";
100                                 reg = <0x600000 0x50000>;
101                                 read-only;
102                         };
103
104                         /*
105                                 The flash space between 0x650000 and 0x7f0000 is blank in the
106                                 stock firmware so it is left out as well.
107                         */
108
109                         radio: partition@7f0000 {
110                                 label = "radio";
111                                 reg = <0x7f0000 0x10000>;
112                                 read-only;
113                         };
114                 };
115         };
116 };
117
118 &state_default {
119         gpio {
120                 groups = "refclk", "wdt", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an";
121                 function = "gpio";
122         };
123 };
124
125 &pcie {
126         status = "okay";
127 };
128
129 &pcie0 {
130         mt76@0,0 {
131                 compatible = "mediatek,mt76";
132                 reg = <0x0000 0 0 0 0>;
133                 mediatek,mtd-eeprom = <&radio 0x8000>;
134                 ieee80211-freq-limit = <5000000 6000000>;
135                 mtd-mac-address = <&config 0x10008>;
136                 mtd-mac-address-increment = <2>;
137         };
138 };
139
140 &wmac {
141         status = "okay";
142
143         mediatek,mtd-eeprom = <&radio 0x0>;
144         mtd-mac-address = <&config 0x10008>;
145         mtd-mac-address-increment = <1>;
146 };
147
148 &ethernet {
149         mtd-mac-address = <&config 0x10008>;
150 };