kernel: remove non-existant symbols
[oweals/openwrt.git] / target / linux / ramips / dts / mt7628an_tplink_archer-c50-v3.dts
1 /dts-v1/;
2
3 #include "mt7628an_tplink_8m.dtsi"
4
5 / {
6         compatible = "tplink,archer-c50-v3", "mediatek,mt7628an-soc";
7         model = "TP-Link Archer C50 v3";
8
9         aliases {
10                 led-boot = &led_power;
11                 led-failsafe = &led_power;
12                 led-running = &led_power;
13                 led-upgrade = &led_power;
14         };
15
16         keys {
17                 compatible = "gpio-keys";
18
19                 reset {
20                         label = "reset";
21                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
22                         linux,code = <KEY_RESTART>;
23                 };
24
25                 rfkill {
26                         label = "rfkill";
27                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
28                         linux,code = <KEY_RFKILL>;
29                 };
30         };
31
32         leds {
33                 compatible = "gpio-leds";
34
35                 lan {
36                         label = "archer-c50-v3:green:lan";
37                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
38                 };
39
40                 led_power: power {
41                         label = "archer-c50-v3:green:power";
42                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
43                 };
44
45                 wan {
46                         label = "archer-c50-v3:green:wan";
47                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
48                 };
49
50                 wan_orange {
51                         label = "archer-c50-v3:orange:wan";
52                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
53                 };
54
55                 wlan {
56                         label = "archer-c50-v3:green:wlan2g";
57                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
58                 };
59
60                 wlan5 {
61                         label = "archer-c50-v3:green:wlan5g";
62                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
63                 };
64
65                 wps {
66                         label = "archer-c50-v3:green:wps";
67                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
68                 };
69         };
70 };
71
72 &state_default {
73         gpio {
74                 groups = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
75                                    "p3led_an", "p4led_an", "wdt", "wled_an";
76                 function = "gpio";
77         };
78 };
79
80 &esw {
81         mediatek,portmap = <0x3e>;
82 };
83
84 &pcie {
85         status = "okay";
86 };
87
88 &pcie0 {
89         mt76@0,0 {
90                 reg = <0x0000 0 0 0 0>;
91                 mediatek,mtd-eeprom = <&factory 0x28000>;
92                 ieee80211-freq-limit = <5000000 6000000>;
93                 mtd-mac-address = <&factory 0xf100>;
94                 mtd-mac-address-increment = <(-1)>;
95         };
96 };