target/linux/ramips/dts/mt7628an_totolink_lr1200.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "totolink,lr1200", "mediatek,mt7628dan";
  11         model = "TOTOLINK LR1200";
  12
  13         aliases {
  14                 led-boot = &led_sys;
  15                 led-failsafe = &led_sys;
  16                 led-running = &led_sys;
  17                 led-upgrade = &led_sys;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_sys: sys {
  24                         label = "lr1200:blue:sys";
  25                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 sms {
  29                         label = "lr1200:blue:sms";
  30                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wifi {
  34                         label = "lr1200:blue:wifi";
  35                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38
  39                 3g {
  40                         label = "lr1200:blue:3g";
  41                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 4g {
  45                         label = "lr1200:blue:4g";
  46                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 rssi1 {
  50                         label = "lr1200:blue:rssi1";
  51                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 rssi2 {
  55                         label = "lr1200:blue:rssi2";
  56                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 rssi3 {
  60                         label = "lr1200:blue:rssi3";
  61                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 rssi4 {
  65                         label = "lr1200:blue:rssi4";
  66                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69
  70         keys {
  71                 compatible = "gpio-keys";
  72
  73                 reset {
  74                         label = "reset";
  75                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_RESTART>;
  77                 };
  78         };
  79 };
  80
  81 &gpio {
  82         gpio_modem_reset {
  83                 gpio-hog;
  84                 gpios = <45 GPIO_ACTIVE_HIGH>;
  85                 output-high;
  86                 line-name = "modem-reset";
  87         };
  88 };
  89
  90 &state_default {
  91         gpio {
  92                 groups = "gpio", "i2c", "i2s", "refclk", "uart1", "wdt", "wled_an";
  93                 function = "gpio";
  94         };
  95 };
  96
  97 &pcie {
  98         status = "okay";
  99 };
 100
 101 &pcie0 {
 102         mt76@0,0 {
 103                 reg = <0x0000 0 0 0 0>;
 104                 mediatek,mtd-eeprom = <&factory 0x8000>;
 105                 ieee80211-freq-limit = <5000000 6000000>;
 106         };
 107 };
 108
 109 &wmac {
 110         status = "okay";
 111 };
 112
 113 &ethernet {
 114         mtd-mac-address = <&factory 0x28>;
 115 };
 116
 117 &spi0 {
 118         status = "okay";
 119
 120         m25p80@0 {
 121                 compatible = "jedec,spi-nor";
 122                 reg = <0>;
 123                 spi-max-frequency = <40000000>;
 124
 125                 partitions {
 126                         compatible = "fixed-partitions";
 127                         #address-cells = <1>;
 128                         #size-cells = <1>;
 129
 130                         partition@0 {
 131                                 label = "u-boot";
 132                                 reg = <0x0 0x30000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@30000 {
 137                                 label = "u-boot-env";
 138                                 reg = <0x30000 0x10000>;
 139                                 read-only;
 140                         };
 141
 142                         factory: partition@40000 {
 143                                 label = "factory";
 144                                 reg = <0x40000 0x10000>;
 145                                 read-only;
 146                         };
 147
 148                         partition@50000 {
 149                                 compatible = "denx,uimage";
 150                                 label = "firmware";
 151                                 reg = <0x50000 0x7b0000>;
 152                         };
 153                 };
 154         };
 155 };