1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
4 #include "mt7628an.dtsi"
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
10 compatible = "totolink,lr1200", "mediatek,mt7628dan";
11 model = "TOTOLINK LR1200";
15 led-failsafe = &led_sys;
16 led-running = &led_sys;
17 led-upgrade = &led_sys;
21 compatible = "gpio-leds";
24 label = "lr1200:blue:sys";
25 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
29 label = "lr1200:blue:sms";
30 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
34 label = "lr1200:blue:wifi";
35 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
36 linux,default-trigger = "phy0tpt";
40 label = "lr1200:blue:3g";
41 gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
45 label = "lr1200:blue:4g";
46 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
50 label = "lr1200:blue:rssi1";
51 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
55 label = "lr1200:blue:rssi2";
56 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
60 label = "lr1200:blue:rssi3";
61 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
65 label = "lr1200:blue:rssi4";
66 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
71 compatible = "gpio-keys";
75 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
76 linux,code = <KEY_RESTART>;
84 gpios = <13 GPIO_ACTIVE_HIGH>;
86 line-name = "modem-reset";
91 state_default: pinctrl0 {
93 ralink,group = "gpio", "i2c", "i2s", "refclk", "uart1", "wdt", "wled_an";
94 ralink,function = "gpio";
105 reg = <0x0000 0 0 0 0>;
106 mediatek,mtd-eeprom = <&factory 0x8000>;
107 ieee80211-freq-limit = <5000000 6000000>;
113 ralink,mtd-eeprom = <&factory 0x4>;
117 mtd-mac-address = <&factory 0x28>;
124 compatible = "jedec,spi-nor";
126 spi-max-frequency = <40000000>;
129 compatible = "fixed-partitions";
130 #address-cells = <1>;
140 label = "u-boot-env";
141 reg = <0x30000 0x10000>;
145 factory: partition@40000 {
147 reg = <0x40000 0x10000>;
152 compatible = "denx,uimage";
154 reg = <0x50000 0x7b0000>;