target/linux/ramips/dts/mt7628an_rakwireless_rak633.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "rakwireless,rak633", "mediatek,mt7628an-soc";
  11         model = "Rakwireless RAK633";
  12
  13         leds {
  14                 compatible = "gpio-leds";
  15
  16                 wifi {
  17                         label = "rak633:blue:wifi";
  18                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  19                 };
  20         };
  21 };
  22
  23 &state_default {
  24         wled_an {
  25                 ralink,group = "wled_an";
  26                 ralink,function = "gpio";
  27         };
  28 };
  29
  30 &spi0 {
  31         status = "okay";
  32
  33         flash@0 {
  34                 compatible = "jedec,spi-nor";
  35                 reg = <0>;
  36                 spi-max-frequency = <10000000>;
  37
  38                 partitions {
  39                         compatible = "fixed-partitions";
  40                         #address-cells = <1>;
  41                         #size-cells = <1>;
  42
  43                         partition@0 {
  44                                 label = "u-boot";
  45                                 reg = <0x0 0x30000>;
  46                                 read-only;
  47                         };
  48
  49                         partition@30000 {
  50                                 label = "u-boot-env";
  51                                 reg = <0x30000 0x10000>;
  52                                 read-only;
  53                         };
  54
  55                         factory: partition@40000 {
  56                                 label = "factory";
  57                                 reg = <0x40000 0x10000>;
  58                                 read-only;
  59                         };
  60
  61                         partition@50000 {
  62                                 compatible = "denx,uimage";
  63                                 label = "firmware";
  64                                 reg = <0x50000 0x7b0000>;
  65                         };
  66                 };
  67         };
  68 };
  69
  70 &i2c {
  71         status = "okay";
  72 };
  73
  74 &i2s {
  75         status = "okay";
  76 };
  77
  78 &uart1 {
  79         status = "okay";
  80 };
  81
  82 &uart2 {
  83         status = "okay";
  84 };
  85
  86 &gdma {
  87         status = "okay";
  88 };
  89
  90 &ethernet {
  91         mtd-mac-address = <&factory 0x28>;
  92 };
  93
  94 &wmac {
  95         status = "okay";
  96 };