target/linux/ramips/dts/mt7628an_hilink_hlk-7628n.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "hilink,hlk-7628n", "mediatek,mt7628an-soc";
  11         model = "HILINK HLK-7628N";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600";
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys-polled";
  19                 poll-interval = <20>;
  20
  21                 reset {
  22                         label = "reset";
  23                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  24                         linux,code = <KEY_RESTART>;
  25                 };
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 wlan {
  32                         label = "hlk-7628n:green:wlan";
  33                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  34                 };
  35         };
  36 };
  37
  38 &pinctrl {
  39         state_default: pinctrl0 {
  40                 gpio {
  41                         ralink,group = "i2c";
  42                         ralink,function = "gpio";
  43                 };
  44         };
  45 };
  46
  47 &uart1 {
  48         status = "okay";
  49 };
  50
  51 &spi0 {
  52         status = "okay";
  53
  54         flash@0 {
  55                 compatible = "jedec,spi-nor";
  56                 reg = <0>;
  57                 spi-max-frequency = <10000000>;
  58
  59                 partitions {
  60                         compatible = "fixed-partitions";
  61                         #address-cells = <1>;
  62                         #size-cells = <1>;
  63
  64                         partition@0 {
  65                                 label = "u-boot";
  66                                 reg = <0x0 0x30000>;
  67                                 read-only;
  68                         };
  69
  70                         partition@30000 {
  71                                 label = "u-boot-env";
  72                                 reg = <0x30000 0x10000>;
  73                                 read-only;
  74                         };
  75
  76                         factory: partition@40000 {
  77                                 label = "factory";
  78                                 reg = <0x40000 0x10000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@50000 {
  83                                 compatible = "denx,uimage";
  84                                 label = "firmware";
  85                                 reg = <0x50000 0x1fb0000>;
  86                         };
  87                 };
  88         };
  89 };
  90
  91 &wmac {
  92         status = "okay";
  93 };
  94