target/linux/ramips/dts/mt7628an_glinet_vixmini.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 /{
  10         compatible = "glinet,vixmini", "mediatek,mt7628an-soc";
  11         model = "GL.iNet VIXMINI";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "vixmini:blue:power";
  29                         default-state = "on";
  30                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wlan {
  34                         label = "vixmini:white:wlan";
  35                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_RESTART>;
  47                 };
  48         };
  49 };
  50
  51 &state_default {
  52         gpio {
  53                 ralink,group = "wdt", "wled_an", "p1led_an";
  54                 ralink,function = "gpio";
  55         };
  56 };
  57
  58 &ethernet {
  59         mtd-mac-address = <&factory 0x4>;
  60 };
  61
  62 &wmac {
  63         status = "okay";
  64 };
  65
  66 &spi0 {
  67         status = "okay";
  68
  69         flash@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <10000000>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         partition@0 {
  80                                 label = "u-boot";
  81                                 reg = <0x0 0x30000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@30000 {
  86                                 label = "u-boot-env";
  87                                 reg = <0x30000 0x10000>;
  88                                 read-only;
  89                         };
  90
  91                         factory: partition@40000 {
  92                                 label = "factory";
  93                                 reg = <0x40000 0x10000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@50000 {
  98                                 compatible = "denx,uimage";
  99                                 label = "firmware";
 100                                 reg = <0x50000 0x7b0000>;
 101                         };
 102                 };
 103         };
 104 };