target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 /{
   9         compatible = "glinet,gl-mt300n-v2", "mediatek,mt7628an-soc";
  10         model = "GL-MT300N-V2";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "gl-mt300n-v2:green:power";
  29                         default-state = "on";
  30                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wan {
  34                         label = "gl-mt300n-v2:green:wan";
  35                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 wlan {
  39                         label = "gl-mt300n-v2:red:wlan";
  40                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         keys {
  45                 compatible = "gpio-keys-polled";
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 BTN_0 {
  55                         label = "BTN_0";
  56                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  57                         linux,code = <BTN_0>;
  58                 };
  59
  60                 BTN_1 {
  61                         label = "BTN_1";
  62                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  63                         linux,code = <BTN_1>;
  64                 };
  65         };
  66
  67         gpio_export {
  68                 compatible = "gpio-export";
  69                 #size-cells = <0>;
  70
  71                 usb {
  72                         gpio-export,name = "usb";
  73                         gpio-export,output = <1>;
  74                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  75                 };
  76         };
  77 };
  78
  79 &pinctrl {
  80         state_default: pinctrl0 {
  81                 gpio {
  82                         ralink,group = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
  83                         ralink,function = "gpio";
  84                 };
  85         };
  86 };
  87
  88 &ethernet {
  89         mtd-mac-address = <&factory 0x4>;
  90 };
  91
  92 &wmac {
  93         status = "okay";
  94         ralink,mtd-eeprom = <&factory 0x0>;
  95 };
  96
  97 &spi0 {
  98         status = "okay";
  99
 100         m25p80@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <10000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "u-boot";
 112                                 reg = <0x0 0x30000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@30000 {
 117                                 label = "u-boot-env";
 118                                 reg = <0x30000 0x10000>;
 119                                 read-only;
 120                         };
 121
 122                         factory: partition@40000 {
 123                                 label = "factory";
 124                                 reg = <0x40000 0x10000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@50000 {
 129                                 compatible = "denx,uimage";
 130                                 label = "firmware";
 131                                 reg = <0x50000 0xfb0000>;
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &uart1 {
 138         status = "okay";
 139 };
 140
 141 &ehci {
 142         status = "okay";
 143 };
 144
 145 &ohci {
 146         status = "okay";
 147 };