target/linux/ramips/dts/mt7621_zbtlink_zbt-we1326.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
  10         model = "Zbtlink ZBT-WE1326";
  11
  12         aliases {
  13                 label-mac-device = &wifi1;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29 };
  30
  31 &state_default {
  32         gpio {
  33                 groups = "wdt";
  34                 function = "gpio";
  35         };
  36 };
  37
  38 &spi0 {
  39         status = "okay";
  40
  41         m25p80@0 {
  42                 compatible = "jedec,spi-nor";
  43                 reg = <0>;
  44                 spi-max-frequency = <10000000>;
  45
  46                 partitions {
  47                         compatible = "fixed-partitions";
  48                         #address-cells = <1>;
  49                         #size-cells = <1>;
  50
  51                         partition@0 {
  52                                 label = "u-boot";
  53                                 reg = <0x0 0x30000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@30000 {
  58                                 label = "u-boot-env";
  59                                 reg = <0x30000 0x10000>;
  60                                 read-only;
  61                         };
  62
  63                         factory: partition@40000 {
  64                                 label = "factory";
  65                                 reg = <0x40000 0x10000>;
  66                                 read-only;
  67                         };
  68
  69                         partition@50000 {
  70                                 compatible = "denx,uimage";
  71                                 label = "firmware";
  72                                 reg = <0x50000 0xfb0000>;
  73                         };
  74                 };
  75         };
  76 };
  77
  78 &gmac0 {
  79         mtd-mac-address = <&factory 0xe000>;
  80 };
  81
  82 &switch0 {
  83         ports {
  84                 port@0 {
  85                         status = "okay";
  86                         label = "lan1";
  87                 };
  88
  89                 port@1 {
  90                         status = "okay";
  91                         label = "lan2";
  92                 };
  93
  94                 port@2 {
  95                         status = "okay";
  96                         label = "lan3";
  97                 };
  98
  99                 port@3 {
 100                         status = "okay";
 101                         label = "lan4";
 102                 };
 103
 104                 port@4 {
 105                         status = "okay";
 106                         label = "wan";
 107                         mtd-mac-address = <&factory 0xe006>;
 108                 };
 109         };
 110 };
 111
 112 &pcie {
 113         status = "okay";
 114 };
 115
 116 &pcie0 {
 117         wifi0: mt76@0,0 {
 118                 reg = <0x0000 0 0 0 0>;
 119                 mediatek,mtd-eeprom = <&factory 0x8000>;
 120                 ieee80211-freq-limit = <5000000 6000000>;
 121         };
 122 };
 123
 124 &pcie1 {
 125         wifi1: mt76@0,0 {
 126                 reg = <0x0000 0 0 0 0>;
 127                 mediatek,mtd-eeprom = <&factory 0x0000>;
 128                 ieee80211-freq-limit = <2400000 2500000>;
 129         };
 130 };
 131
 132 &sdhci {
 133         status = "okay";
 134 };