target/linux/ramips/dts/mt7621_zbtlink_zbt-we1326.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
  10         model = "Zbtlink ZBT-WE1326";
  11
  12         aliases {
  13                 label-mac-device = &wifi1;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29 };
  30
  31 &pinctrl {
  32         state_default: pinctrl0 {
  33                 gpio {
  34                         ralink,group = "wdt";
  35                         ralink,function = "gpio";
  36                 };
  37         };
  38 };
  39
  40 &spi0 {
  41         status = "okay";
  42
  43         m25p80@0 {
  44                 compatible = "jedec,spi-nor";
  45                 reg = <0>;
  46                 spi-max-frequency = <10000000>;
  47
  48                 partitions {
  49                         compatible = "fixed-partitions";
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52
  53                         partition@0 {
  54                                 label = "u-boot";
  55                                 reg = <0x0 0x30000>;
  56                                 read-only;
  57                         };
  58
  59                         partition@30000 {
  60                                 label = "u-boot-env";
  61                                 reg = <0x30000 0x10000>;
  62                                 read-only;
  63                         };
  64
  65                         factory: partition@40000 {
  66                                 label = "factory";
  67                                 reg = <0x40000 0x10000>;
  68                                 read-only;
  69                         };
  70
  71                         partition@50000 {
  72                                 compatible = "denx,uimage";
  73                                 label = "firmware";
  74                                 reg = <0x50000 0xfb0000>;
  75                         };
  76                 };
  77         };
  78 };
  79
  80 &ethernet {
  81         mtd-mac-address = <&factory 0xe000>;
  82 };
  83
  84 &pcie {
  85         status = "okay";
  86 };
  87
  88 &pcie0 {
  89         wifi0: mt76@0,0 {
  90                 reg = <0x0000 0 0 0 0>;
  91                 mediatek,mtd-eeprom = <&factory 0x8000>;
  92                 ieee80211-freq-limit = <5000000 6000000>;
  93         };
  94 };
  95
  96 &pcie1 {
  97         wifi1: mt76@0,0 {
  98                 reg = <0x0000 0 0 0 0>;
  99                 mediatek,mtd-eeprom = <&factory 0x0000>;
 100                 ieee80211-freq-limit = <2400000 2500000>;
 101         };
 102 };
 103
 104 &sdhci {
 105         status = "okay";
 106 };