target/linux/ramips/dts/mt7621_youhua_wr1200js.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "youhua,wr1200js", "mediatek,mt7621-soc";
  10         model = "YouHua WR1200JS";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 internet {
  25                         label = "wr1200js:blue:internet";
  26                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 led_wps: wps {
  30                         label = "wr1200js:blue:wps";
  31                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 usb {
  35                         label = "wr1200js:blue:usb";
  36                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  37                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  38                         linux,default-trigger = "usbport";
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50
  51                 wps {
  52                         label = "wps";
  53                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_WPS_BUTTON>;
  55                 };
  56
  57                 wifi {
  58                         label = "wifi";
  59                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_RFKILL>;
  61                 };
  62         };
  63 };
  64
  65 &spi0 {
  66         status = "okay";
  67
  68         m25p80@0 {
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <10000000>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         partition@0 {
  79                                 label = "u-boot";
  80                                 reg = <0x0 0x30000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@30000 {
  85                                 label = "u-boot-env";
  86                                 reg = <0x30000 0x10000>;
  87                                 read-only;
  88                         };
  89
  90                         factory: partition@40000 {
  91                                 label = "factory";
  92                                 reg = <0x40000 0x10000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@50000 {
  97                                 compatible = "denx,uimage";
  98                                 label = "firmware";
  99                                 reg = <0x50000 0xfb0000>;
 100                         };
 101                 };
 102         };
 103 };
 104
 105 &pcie {
 106         status = "okay";
 107 };
 108
 109 &pcie0 {
 110         mt76@0,0 {
 111                 reg = <0x0000 0 0 0 0>;
 112                 mediatek,mtd-eeprom = <&factory 0x0000>;
 113         };
 114 };
 115
 116 &pcie1 {
 117         mt76@0,0 {
 118                 reg = <0x0000 0 0 0 0>;
 119                 mediatek,mtd-eeprom = <&factory 0x8000>;
 120                 ieee80211-freq-limit = <5000000 6000000>;
 121
 122                 led {
 123                         led-sources = <2>;
 124                         led-active-low;
 125                 };
 126         };
 127 };
 128
 129 &gmac0 {
 130         mtd-mac-address = <&factory 0xe000>;
 131 };
 132
 133 &switch0 {
 134         ports {
 135                 port@0 {
 136                         status = "okay";
 137                         label = "wan";
 138                         mtd-mac-address = <&factory 0xe006>;
 139                 };
 140
 141                 port@1 {
 142                         status = "okay";
 143                         label = "lan1";
 144                 };
 145
 146                 port@2 {
 147                         status = "okay";
 148                         label = "lan2";
 149                 };
 150
 151                 port@3 {
 152                         status = "okay";
 153                         label = "lan3";
 154                 };
 155
 156                 port@4 {
 157                         status = "okay";
 158                         label = "lan4";
 159                 };
 160         };
 161 };
 162
 163 &state_default {
 164         gpio {
 165                 groups = "i2c", "uart2", "uart3", "wdt";
 166                 function = "gpio";
 167         };
 168 };