target/linux/ramips/dts/mt7621_youhua_wr1200js.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "youhua,wr1200js", "mediatek,mt7621-soc";
  10         model = "YouHua WR1200JS";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 internet {
  25                         label = "wr1200js:blue:internet";
  26                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 led_wps: wps {
  30                         label = "wr1200js:blue:wps";
  31                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 usb {
  35                         label = "wr1200js:blue:usb";
  36                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  37                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  38                         linux,default-trigger = "usbport";
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys-polled";
  44                 poll-interval = <20>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51
  52                 wps {
  53                         label = "wps";
  54                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_WPS_BUTTON>;
  56                 };
  57
  58                 wifi {
  59                         label = "wifi";
  60                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  61                         linux,code = <KEY_RFKILL>;
  62                 };
  63         };
  64 };
  65
  66 &spi0 {
  67         status = "okay";
  68
  69         m25p80@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <10000000>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         partition@0 {
  80                                 label = "u-boot";
  81                                 reg = <0x0 0x30000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@30000 {
  86                                 label = "u-boot-env";
  87                                 reg = <0x30000 0x10000>;
  88                                 read-only;
  89                         };
  90
  91                         factory: partition@40000 {
  92                                 label = "factory";
  93                                 reg = <0x40000 0x10000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@50000 {
  98                                 compatible = "denx,uimage";
  99                                 label = "firmware";
 100                                 reg = <0x50000 0xfb0000>;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &pcie {
 107         status = "okay";
 108 };
 109
 110 &pcie0 {
 111         mt76@0,0 {
 112                 reg = <0x0000 0 0 0 0>;
 113                 mediatek,mtd-eeprom = <&factory 0x0000>;
 114         };
 115 };
 116
 117 &pcie1 {
 118         mt76@0,0 {
 119                 reg = <0x0000 0 0 0 0>;
 120                 mediatek,mtd-eeprom = <&factory 0x8000>;
 121                 ieee80211-freq-limit = <5000000 6000000>;
 122
 123                 led {
 124                         led-sources = <2>;
 125                         led-active-low;
 126                 };
 127         };
 128 };
 129
 130 &ethernet {
 131         mtd-mac-address = <&factory 0xe000>;
 132 };
 133
 134 &pinctrl {
 135         state_default: pinctrl0 {
 136                 gpio {
 137                         ralink,group = "i2c", "uart2", "uart3", "wdt";
 138                         ralink,function = "gpio";
 139                 };
 140         };
 141 };