ramips: add support for TP-Link RE200 v1
[oweals/openwrt.git] / target / linux / ramips / dts / mt7621_youhua_wr1200js.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "youhua,wr1200js", "mediatek,mt7621-soc";
10         model = "YouHua WR1200JS";
11
12         aliases {
13                 led-boot = &led_wps;
14                 led-failsafe = &led_wps;
15         };
16
17         chosen {
18                 bootargs = "console=ttyS0,115200";
19         };
20
21         leds {
22                 compatible = "gpio-leds";
23
24                 internet {
25                         label = "wr1200js:blue:internet";
26                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
27                 };
28
29                 led_wps: wps {
30                         label = "wr1200js:blue:wps";
31                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
32                 };
33
34                 usb {
35                         label = "wr1200js:blue:usb";
36                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
37                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
38                         linux,default-trigger = "usbport";
39                 };
40         };
41
42         keys {
43                 compatible = "gpio-keys";
44
45                 reset {
46                         label = "reset";
47                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
48                         linux,code = <KEY_RESTART>;
49                 };
50
51                 wps {
52                         label = "wps";
53                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
54                         linux,code = <KEY_WPS_BUTTON>;
55                 };
56
57                 wifi {
58                         label = "wifi";
59                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
60                         linux,code = <KEY_RFKILL>;
61                 };
62         };
63 };
64
65 &spi0 {
66         status = "okay";
67
68         m25p80@0 {
69                 compatible = "jedec,spi-nor";
70                 reg = <0>;
71                 spi-max-frequency = <10000000>;
72
73                 partitions {
74                         compatible = "fixed-partitions";
75                         #address-cells = <1>;
76                         #size-cells = <1>;
77
78                         partition@0 {
79                                 label = "u-boot";
80                                 reg = <0x0 0x30000>;
81                                 read-only;
82                         };
83
84                         partition@30000 {
85                                 label = "u-boot-env";
86                                 reg = <0x30000 0x10000>;
87                                 read-only;
88                         };
89
90                         factory: partition@40000 {
91                                 label = "factory";
92                                 reg = <0x40000 0x10000>;
93                                 read-only;
94                         };
95
96                         partition@50000 {
97                                 compatible = "denx,uimage";
98                                 label = "firmware";
99                                 reg = <0x50000 0xfb0000>;
100                         };
101                 };
102         };
103 };
104
105 &pcie {
106         status = "okay";
107 };
108
109 &pcie0 {
110         mt76@0,0 {
111                 reg = <0x0000 0 0 0 0>;
112                 mediatek,mtd-eeprom = <&factory 0x0000>;
113         };
114 };
115
116 &pcie1 {
117         mt76@0,0 {
118                 reg = <0x0000 0 0 0 0>;
119                 mediatek,mtd-eeprom = <&factory 0x8000>;
120                 ieee80211-freq-limit = <5000000 6000000>;
121
122                 led {
123                         led-sources = <2>;
124                         led-active-low;
125                 };
126         };
127 };
128
129 &ethernet {
130         mtd-mac-address = <&factory 0xe000>;
131 };
132
133 &state_default {
134         gpio {
135                 ralink,group = "i2c", "uart2", "uart3", "wdt";
136                 ralink,function = "gpio";
137         };
138 };