target/linux/ramips/dts/mt7621_wevo_w2914ns-v2.dtsi

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600";
  11         };
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 reset {
  17                         label = "reset";
  18                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  19                         linux,code = <KEY_RESTART>;
  20                 };
  21
  22                 wps {
  23                         label = "wps";
  24                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                 };
  27         };
  28 };
  29
  30 &xhci {
  31         status = "okay";
  32 };
  33
  34 &spi0 {
  35         status = "okay";
  36
  37         flash@0 {
  38                 compatible = "jedec,spi-nor";
  39                 reg = <0>;
  40                 spi-max-frequency = <80000000>;
  41                 m25p,fast-read;
  42
  43                 partitions {
  44                         compatible = "fixed-partitions";
  45                         #address-cells = <1>;
  46                         #size-cells = <1>;
  47
  48                         partition@0 {
  49                                 label = "u-boot";
  50                                 reg = <0x0 0x30000>;
  51                                 read-only;
  52                         };
  53
  54                         partition@30000 {
  55                                 label = "u-boot-env";
  56                                 reg = <0x30000 0x10000>;
  57                                 read-only;
  58                         };
  59
  60                         factory: partition@40000 {
  61                                 label = "factory";
  62                                 reg = <0x40000 0x10000>;
  63                                 read-only;
  64                         };
  65
  66                         partition@50000 {
  67                                 compatible = "denx,uimage";
  68                                 label = "firmware";
  69                                 reg = <0x50000 0xfb0000>;
  70                         };
  71                 };
  72         };
  73 };
  74
  75 &pcie {
  76         status = "okay";
  77 };
  78
  79 &pcie0 {
  80         wifi@0,0 {
  81                 compatible = "mediatek,mt76";
  82                 reg = <0x0000 0 0 0 0>;
  83                 mediatek,mtd-eeprom = <&factory 0x0000>;
  84
  85                 led {
  86                         led-sources = <0>;
  87                         led-active-low;
  88                 };
  89         };
  90 };
  91
  92 &pcie1 {
  93         wifi@0,0 {
  94                 compatible = "mediatek,mt76";
  95                 reg = <0x0000 0 0 0 0>;
  96                 mediatek,mtd-eeprom = <&factory 0x8000>;
  97                 ieee80211-freq-limit = <5000000 6000000>;
  98
  99                 led {
 100                         led-sources = <2>;
 101                         led-active-low;
 102                 };
 103         };
 104 };
 105
 106 &ethernet {
 107         mtd-mac-address = <&factory 0xe000>;
 108 };
 109
 110 &pinctrl {
 111         state_default: pinctrl0 {
 112                 gpio {
 113                         ralink,group = "wdt", "rgmii2";
 114                         ralink,function = "gpio";
 115                 };
 116         };
 117 };