target/linux/ramips/dts/mt7621_wevo_w2914ns-v2.dtsi

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600";
  11         };
  12
  13         keys {
  14                 compatible = "gpio-keys";
  15
  16                 reset {
  17                         label = "reset";
  18                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  19                         linux,code = <KEY_RESTART>;
  20                 };
  21
  22                 wps {
  23                         label = "wps";
  24                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                 };
  27         };
  28 };
  29
  30 &xhci {
  31         status = "okay";
  32 };
  33
  34 &spi0 {
  35         status = "okay";
  36
  37         m25p80@0 {
  38                 compatible = "jedec,spi-nor";
  39                 reg = <0>;
  40                 spi-max-frequency = <10000000>;
  41
  42                 partitions {
  43                         compatible = "fixed-partitions";
  44                         #address-cells = <1>;
  45                         #size-cells = <1>;
  46
  47                         partition@0 {
  48                                 label = "u-boot";
  49                                 reg = <0x0 0x30000>;
  50                                 read-only;
  51                         };
  52
  53                         partition@30000 {
  54                                 label = "u-boot-env";
  55                                 reg = <0x30000 0x10000>;
  56                                 read-only;
  57                         };
  58
  59                         factory: partition@40000 {
  60                                 label = "factory";
  61                                 reg = <0x40000 0x10000>;
  62                                 read-only;
  63                         };
  64
  65                         partition@50000 {
  66                                 compatible = "denx,uimage";
  67                                 label = "firmware";
  68                                 reg = <0x50000 0xfb0000>;
  69                         };
  70                 };
  71         };
  72 };
  73
  74 &pcie {
  75         status = "okay";
  76 };
  77
  78 &pcie0 {
  79         wifi@0,0 {
  80                 compatible = "pci14c3,7603";
  81                 reg = <0x0000 0 0 0 0>;
  82                 mediatek,mtd-eeprom = <&factory 0x0000>;
  83         };
  84 };
  85
  86 &pcie1 {
  87         wifi@0,0 {
  88                 compatible = "pci14c3,7662";
  89                 reg = <0x0000 0 0 0 0>;
  90                 mediatek,mtd-eeprom = <&factory 0x8000>;
  91                 ieee80211-freq-limit = <5000000 6000000>;
  92         };
  93 };
  94
  95 &ethernet {
  96         mtd-mac-address = <&factory 0xe000>;
  97 };
  98
  99 &pinctrl {
 100         state_default: pinctrl0 {
 101                 gpio {
 102                         ralink,group = "wdt", "rgmii2", "jtag", "mdio";
 103                         ralink,function = "gpio";
 104                 };
 105         };
 106 };