ramips: add support for ALFA Network Quad-E4G
[oweals/openwrt.git] / target / linux / ramips / dts / mt7621_planex_vr500.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "planex,vr500", "mediatek,mt7621-soc";
10         model = "Planex VR500";
11
12         aliases {
13                 led-boot = &led_power;
14                 led-failsafe = &led_power;
15                 led-running = &led_power;
16                 led-upgrade = &led_power;
17         };
18
19         chosen {
20                 bootargs = "console=ttyS0,57600";
21         };
22
23         leds {
24                 compatible = "gpio-leds";
25
26                 led_power: power {
27                         label = "vr500:green:power";
28                         gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
29                 };
30         };
31
32         keys {
33                 compatible = "gpio-keys";
34
35                 reset {
36                         label = "reset";
37                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
38                         linux,code = <KEY_RESTART>;
39                 };
40         };
41 };
42
43 &spi0 {
44         status = "okay";
45
46         m25p80@0 {
47                 compatible = "jedec,spi-nor";
48                 reg = <0>;
49                 spi-max-frequency = <10000000>;
50
51                 partitions {
52                         compatible = "fixed-partitions";
53                         #address-cells = <1>;
54                         #size-cells = <1>;
55
56                         partition@0 {
57                                 label = "u-boot";
58                                 reg = <0x0 0x30000>;
59                                 read-only;
60                         };
61
62                         partition@30000 {
63                                 label = "u-boot-env";
64                                 reg = <0x30000 0x10000>;
65                                 read-only;
66                         };
67
68                         factory: partition@40000 {
69                                 label = "factory";
70                                 reg = <0x40000 0x10000>;
71                                 read-only;
72                         };
73
74                         partition@50000 {
75                                 compatible = "denx,uimage";
76                                 label = "firmware";
77                                 reg = <0x50000 0x3fb0000>;
78                         };
79                 };
80         };
81 };
82
83 &ethernet {
84         mtd-mac-address = <&factory 0xe000>;
85 };
86
87 &pinctrl {
88         state_default: pinctrl0 {
89                 gpio {
90                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
91                         ralink,function = "gpio";
92                 };
93         };
94 };