ramips: fix switch setup for Xiaomi MiWiFi Nano
[oweals/openwrt.git] / target / linux / ramips / dts / mt7621_netis_wf-2881.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "netis,wf-2881", "mediatek,mt7621-soc";
10         model = "NETIS WF-2881";
11
12         aliases {
13                 led-boot = &led_wps;
14                 led-failsafe = &led_wps;
15                 led-running = &led_wps;
16                 led-upgrade = &led_wps;
17                 label-mac-device = &ethernet;
18         };
19
20         chosen {
21                 bootargs = "console=ttyS0,57600";
22         };
23
24         leds {
25                 compatible = "gpio-leds";
26
27                 usb {
28                         label = "wf-2881:green:usb";
29                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
30                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
31                         linux,default-trigger = "usbport";
32                 };
33
34                 led_wps: wps {
35                         label = "wf-2881:green:wps";
36                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
37                 };
38         };
39
40         keys {
41                 compatible = "gpio-keys";
42
43                 reset {
44                         label = "reset";
45                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
46                         linux,code = <KEY_RESTART>;
47                 };
48         };
49 };
50
51 &nand {
52         status = "okay";
53
54         partitions {
55                 compatible = "fixed-partitions";
56                 #address-cells = <1>;
57                 #size-cells = <1>;
58
59                 partition@0 {
60                         label = "u-boot";
61                         reg = <0x0 0x80000>;
62                         read-only;
63                 };
64
65                 partition@80000 {
66                         label = "config";
67                         reg = <0x80000 0x80000>;
68                         read-only;
69                 };
70
71                 factory: partition@100000 {
72                         label = "factory";
73                         reg = <0x100000 0x40000>;
74                         read-only;
75                 };
76
77                 partition@140000 {
78                         compatible = "denx,uimage";
79                         label = "firmware";
80                         reg = <0x140000 0x7e40000>;
81                 };
82         };
83 };
84
85 &pcie {
86         status = "okay";
87 };
88
89 &pcie0 {
90         wifi@0,0 {
91                 compatible = "mediatek,mt76";
92                 reg = <0x0000 0 0 0 0>;
93                 mediatek,mtd-eeprom = <&factory 0x8000>;
94                 ieee80211-freq-limit = <5000000 6000000>;
95
96                 led {
97                         led-sources = <2>;
98                         led-active-low;
99                 };
100         };
101 };
102
103 &pcie1 {
104         wifi@0,0 {
105                 compatible = "mediatek,mt76";
106                 reg = <0x0000 0 0 0 0>;
107                 mediatek,mtd-eeprom = <&factory 0x0000>;
108                 ieee80211-freq-limit = <2400000 2500000>;
109
110                 led {
111                         led-sources = <2>;
112                         led-active-low;
113                 };
114         };
115 };
116
117 &ethernet {
118         mtd-mac-address = <&factory 0xe000>;
119 };
120
121 &state_default {
122         gpio {
123                 ralink,group = "uart3", "uart2";
124                 ralink,function = "gpio";
125         };
126 };