ramips: remove RAM size from device name for UniElec devices
[oweals/openwrt.git] / target / linux / ramips / dts / mt7621_netis_wf-2881.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "netis,wf-2881", "mediatek,mt7621-soc";
10         model = "NETIS WF-2881";
11
12         aliases {
13                 led-boot = &led_wps;
14                 led-failsafe = &led_wps;
15                 led-running = &led_wps;
16                 led-upgrade = &led_wps;
17         };
18
19         chosen {
20                 bootargs = "console=ttyS0,57600";
21         };
22
23         leds {
24                 compatible = "gpio-leds";
25
26                 usb {
27                         label = "wf-2881:green:usb";
28                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
29                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
30                         linux,default-trigger = "usbport";
31                 };
32
33                 led_wps: wps {
34                         label = "wf-2881:green:wps";
35                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
36                 };
37         };
38
39         keys {
40                 compatible = "gpio-keys";
41
42                 reset {
43                         label = "reset";
44                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
45                         linux,code = <KEY_RESTART>;
46                 };
47         };
48 };
49
50 &nand {
51         status = "okay";
52
53         partitions {
54                 compatible = "fixed-partitions";
55                 #address-cells = <1>;
56                 #size-cells = <1>;
57
58                 partition@0 {
59                         label = "u-boot";
60                         reg = <0x0 0x30000>;
61                         read-only;
62                 };
63
64                 partition@30000 {
65                         label = "u-boot-env";
66                         reg = <0x30000 0x1000>;
67                         read-only;
68                 };
69
70                 partition@80000 {
71                         label = "config";
72                         reg = <0x80000 0x80000>;
73                         read-only;
74                 };
75
76                 factory: partition@100000 {
77                         label = "factory";
78                         reg = <0x100000 0x40000>;
79                         read-only;
80                 };
81
82                 partition@140000 {
83                         compatible = "denx,uimage";
84                         label = "firmware";
85                         reg = <0x140000 0x7E40000>;
86                 };
87         };
88 };
89
90 &pcie {
91         status = "okay";
92 };
93
94 &pcie0 {
95         mt76@0,0 {
96                 reg = <0x0000 0 0 0 0>;
97                 mediatek,mtd-eeprom = <&factory 0x8000>;
98                 ieee80211-freq-limit = <5000000 6000000>;
99         };
100 };
101
102 &pcie1 {
103         mt76@0,0 {
104                 reg = <0x0000 0 0 0 0>;
105                 mediatek,mtd-eeprom = <&factory 0x0000>;
106                 ieee80211-freq-limit = <2400000 2500000>;
107         };
108 };
109
110 &ethernet {
111         mtd-mac-address = <&factory 0xe006>;
112 };
113
114 &pinctrl {
115         state_default: pinctrl0 {
116                 gpio {
117                         ralink,group = "uart3", "jtag";
118                         ralink,function = "gpio";
119                 };
120         };
121 };