ramips: add support for Netgear EX6130
[oweals/openwrt.git] / target / linux / ramips / dts / mt7621_netgear_sercomm.dtsi
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3
4 #include "mt7621.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10         compatible = "mediatek,mt7621-soc";
11
12         aliases {
13                 led-boot = &led_power;
14                 led-failsafe = &led_power;
15                 led-running = &led_power;
16                 led-upgrade = &led_power;
17                 label-mac-device = &ethernet;
18         };
19
20         chosen {
21                 bootargs = "console=ttyS0,57600";
22         };
23
24         leds: leds {
25                 compatible = "gpio-leds";
26
27                 led_power: power {
28                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
29                 };
30
31                 led_usb: usb {
32                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
33                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
34                         linux,default-trigger = "usbport";
35                 };
36
37                 led_internet: internet {
38                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
39                 };
40
41                 led_wifi: wifi {
42                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
43                         linux,default-trigger = "phy0tpt";
44                 };
45         };
46
47         reg_usb_vbus: regulator {
48                 compatible = "regulator-fixed";
49                 regulator-name = "usb_vbus";
50                 regulator-min-microvolt = <5000000>;
51                 regulator-max-microvolt = <5000000>;
52                 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
53                 enable-active-high;
54         };
55 };
56
57 &xhci {
58         vbus-supply = <&reg_usb_vbus>;
59 };
60
61 &pcie {
62         status = "okay";
63 };
64
65 &pcie0 {
66         wifi@0,0 {
67                 compatible = "mediatek,mt76";
68                 reg = <0x0 0 0 0 0>;
69                 mediatek,mtd-eeprom = <&factory 0x8000>;
70                 ieee80211-freq-limit = <5000000 6000000>;
71         };
72 };
73
74 &pcie1 {
75         wifi@0,0 {
76                 compatible = "mediatek,mt76";
77                 reg = <0x0 0 0 0 0>;
78                 mediatek,mtd-eeprom = <&factory 0x0>;
79                 ieee80211-freq-limit = <2400000 2500000>;
80         };
81 };
82
83 &ethernet {
84         mtd-mac-address = <&factory 0x4>;
85 };
86
87 &pinctrl {
88         state_default: pinctrl0 {
89                 gpio {
90                         ralink,group = "uart3", "uart2", "jtag", "wdt";
91                         ralink,function = "gpio";
92                 };
93         };
94 };