target/linux/ramips/dts/mt7621_netgear_ex6150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7621.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "netgear,ex6150", "mediatek,mt7621-soc";
  11         model = "Netgear EX6150";
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_amber;
  16                 led-running = &power_green;
  17                 led-upgrade = &power_amber;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,57600";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power_amber: power_amber {
  28                         label = "ex6150:amber:power";
  29                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 power_green: power_green {
  33                         label = "ex6150:green:power";
  34                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 wps {
  38                         label = "ex6150:green:wps";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 rightarrow {
  43                         label = "ex6150:blue:rightarrow";
  44                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 leftarrow {
  48                         label = "ex6150:blue:leftarrow";
  49                         gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 router_green {
  53                         label = "ex6150:green:router";
  54                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 router_red {
  59                         label = "ex6150:red:router";
  60                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 client_green {
  64                         label = "ex6150:green:client";
  65                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  66                         linux,default-trigger = "phy0tpt";
  67                 };
  68
  69                 client_red {
  70                         label = "ex6150:red:client";
  71                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  72                 };
  73         };
  74
  75         keys {
  76                 compatible = "gpio-keys";
  77
  78                 wps {
  79                         label = "wps";
  80                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  81                         linux,code = <KEY_WPS_BUTTON>;
  82                 };
  83
  84                 reset {
  85                         label = "reset";
  86                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_RESTART>;
  88                 };
  89
  90                 toggle {
  91                         label = "AP/Extender toggle";
  92                         gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
  93                         linux,code = <BTN_0>;
  94                         /* Active when switch is set to "Access Point" */
  95                 };
  96         };
  97 };
  98
  99 &spi0 {
 100         status = "okay";
 101
 102         flash@0 {
 103                 compatible = "jedec,spi-nor";
 104                 reg = <0>;
 105                 spi-max-frequency = <10000000>;
 106
 107                 partitions {
 108                         compatible = "fixed-partitions";
 109                         #address-cells = <1>;
 110                         #size-cells = <1>;
 111
 112                         partition@0 {
 113                                 label = "u-boot";
 114                                 reg = <0x0 0x30000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@30000 {
 119                                 label = "config";
 120                                 reg = <0x30000 0x10000>;
 121                                 read-only;
 122                         };
 123
 124                         factory: partition@40000 {
 125                                 label = "factory";
 126                                 reg = <0x40000 0x10000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@50000 {
 131                                 compatible = "denx,uimage";
 132                                 label = "firmware";
 133                                 reg = <0x50000 0xe80000>;
 134                         };
 135
 136                         partition@ed0000 {
 137                                 label = "ML1";
 138                                 reg = <0xed0000 0x10000>;
 139                                 read-only;
 140                         };
 141
 142                         partition@ef0000 {
 143                                 label = "ML2";
 144                                 reg = <0xef0000 0x20000>;
 145                                 read-only;
 146                         };
 147
 148                         partition@f10000 {
 149                                 label = "ML3";
 150                                 reg = <0xf10000 0x20000>;
 151                                 read-only;
 152                         };
 153
 154                         partition@f30000 {
 155                                 label = "ML4";
 156                                 reg = <0xf30000 0x20000>;
 157                                 read-only;
 158                         };
 159
 160                         partition@f50000 {
 161                                 label = "ML5";
 162                                 reg = <0xf50000 0x20000>;
 163                                 read-only;
 164                         };
 165
 166                         partition@f70000 {
 167                                 label = "ML6";
 168                                 reg = <0xf70000 0x20000>;
 169                                 read-only;
 170                         };
 171
 172                         partition@f90000 {
 173                                 label = "ML7";
 174                                 reg = <0xf90000 0x20000>;
 175                                 read-only;
 176                         };
 177
 178                         partition@fb0000 {
 179                                 label = "T_Meter1";
 180                                 reg = <0xfb0000 0x10000>;
 181                                 read-only;
 182                         };
 183
 184                         partition@fc0000 {
 185                                 label = "T_Meter2";
 186                                 reg = <0xfc0000 0x10000>;
 187                                 read-only;
 188                         };
 189
 190                         partition@fd0000 {
 191                                 label = "POT";
 192                                 reg = <0xfd0000 0x10000>;
 193                                 read-only;
 194                         };
 195
 196                         partition@fe0000 {
 197                                 label = "board_data";
 198                                 reg = <0xfe0000 0x10000>;
 199                                 read-only;
 200                         };
 201
 202                         partition@ff0000 {
 203                                 label = "nvram";
 204                                 reg = <0xff0000 0x10000>;
 205                                 read-only;
 206                         };
 207                 };
 208         };
 209 };
 210
 211 &pcie {
 212         status = "okay";
 213 };
 214
 215 &pcie0 {
 216         wifi@0,0 {
 217                 reg = <0x0000 0 0 0 0>;
 218                 mediatek,mtd-eeprom = <&factory 0x8000>;
 219                 ieee80211-freq-limit = <5000000 6000000>;
 220         };
 221 };
 222
 223 &pcie1 {
 224         wifi@0,0 {
 225                 reg = <0x0000 0 0 0 0>;
 226                 mediatek,mtd-eeprom = <&factory 0x0000>;
 227                 ieee80211-freq-limit = <2400000 2500000>;
 228         };
 229 };
 230
 231 &gmac0 {
 232         mtd-mac-address = <&factory 0x4>;
 233 };
 234
 235 &switch0 {
 236         ports {
 237                 port@0 {
 238                         status = "okay";
 239                         label = "lan";
 240                 };
 241         };
 242 };
 243
 244 &state_default {
 245         gpio {
 246                 groups = "sdhci", "rgmii2", "jtag";
 247                 function = "gpio";
 248         };
 249 };