target/linux/ramips/dts/mt7621_mtc_wr1201.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "mtc,wr1201", "mediatek,mt7621-soc";
  10         model = "MTC Wireless Router WR1201";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17                 label-mac-device = &gmac0;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,57600";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_power: power {
  28                         label = "wr1201:green:power";
  29                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 usb {
  33                         label = "wr1201:green:usb";
  34                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  35                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  36                         linux,default-trigger = "usbport";
  37                 };
  38
  39                 eth_link {
  40                         label = "wr1201:green:eth_link";
  41                         gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wps {
  45                         label = "wr1201:green:wps";
  46                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  47                 };
  48         };
  49
  50         keys {
  51                 compatible = "gpio-keys";
  52
  53                 reset {
  54                         label = "reset";
  55                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_RESTART>;
  57                 };
  58         };
  59 };
  60
  61 &spi0 {
  62         status = "okay";
  63
  64         flash@0 {
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <10000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "Bootloader";
  76                                 reg = <0x0 0x30000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@30000 {
  81                                 label = "Config";
  82                                 reg = <0x30000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         factory: partition@40000 {
  87                                 label = "factory";
  88                                 reg = <0x40000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@50000 {
  93                                 compatible = "denx,uimage";
  94                                 label = "firmware";
  95                                 reg = <0x50000 0xfa0000>;
  96                         };
  97
  98                         partition@ff0000 {
  99                                 label = "Second_Config";
 100                                 reg = <0xff0000 0x10000>;
 101                                 read-only;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &gmac0 {
 108         mtd-mac-address = <&factory 0x4>;
 109 };
 110
 111 &switch0 {
 112         ports {
 113                 port@0 {
 114                         status = "okay";
 115                         label = "lan4";
 116                 };
 117
 118                 port@1 {
 119                         status = "okay";
 120                         label = "lan3";
 121                 };
 122
 123                 port@2 {
 124                         status = "okay";
 125                         label = "lan2";
 126                 };
 127
 128                 port@3 {
 129                         status = "okay";
 130                         label = "lan1";
 131                 };
 132
 133                 port@4 {
 134                         status = "okay";
 135                         label = "wan";
 136                         mtd-mac-address = <&factory 0x4>;
 137                         mtd-mac-address-increment = <1>;
 138                 };
 139         };
 140 };
 141
 142 &sdhci {
 143         status = "okay";
 144 };
 145
 146 &pcie {
 147         status = "okay";
 148 };
 149
 150 &pcie0 {
 151         wifi@0,0 {
 152                 reg = <0x0000 0 0 0 0>;
 153                 mediatek,mtd-eeprom = <&factory 0x8000>;
 154                 ieee80211-freq-limit = <5000000 6000000>;
 155
 156                 led {
 157                         led-sources = <2>;
 158                         led-active-low;
 159                 };
 160         };
 161 };
 162
 163 &pcie1 {
 164         wifi@0,0 {
 165                 reg = <0x0000 0 0 0 0>;
 166                 mediatek,mtd-eeprom = <&factory 0x0000>;
 167                 ieee80211-freq-limit = <2400000 2500000>;
 168
 169                 led {
 170                         led-sources = <2>;
 171                         led-active-low;
 172                 };
 173         };
 174 };
 175
 176 &state_default {
 177         gpio {
 178                 groups = "rgmii2";
 179                 function = "gpio";
 180         };
 181 };