target/linux/ramips/dts/mt7621_mediatek_ap-mt7621a-v60.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,ap-mt7621a-v60", "mediatek,mt7621-soc";
   7         model = "Mediatek AP-MT7621A-V60 EVB";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600";
  11         };
  12
  13         sound {
  14                 compatible = "simple-audio-card";
  15                 simple-audio-card,name = "Audio-I2S";
  16                 simple-audio-card,format = "i2s";
  17                 simple-audio-card,bitclock-master = <&dailink0_master>;
  18                 simple-audio-card,frame-master = <&dailink0_master>;
  19                 simple-audio-card,widgets =
  20                         "Microphone", "Microphone Jack",
  21                         "Headphone", "Headphone Jack";
  22                 simple-audio-card,routing =
  23                         "LINPUT1", "Microphone Jack",
  24                         "RINPUT1", "Microphone Jack",
  25                         "Headphone Jack", "HP_L",
  26                         "Headphone Jack", "HP_R";
  27                 simple-audio-card,mclk-fs = <256>;
  28
  29                 simple-audio-card,cpu {
  30                         sound-dai = <&i2s>;
  31                 };
  32
  33                 dailink0_master: simple-audio-card,codec {
  34                         sound-dai = <&codec>;
  35                 };
  36         };
  37 };
  38
  39 &state_default {
  40         gpio {
  41                 groups = "uart2", "rgmii2";
  42                 function = "gpio";
  43         };
  44 };
  45
  46 &pinctrl {
  47         i2s_pins: i2s {
  48                 i2s {
  49                         groups = "uart3";
  50                         function = "i2s";
  51                 };
  52         };
  53 };
  54
  55 &i2c {
  56         status = "okay";
  57
  58         codec: wm8960@1a {
  59                 #sound-dai-cells = <0>;
  60                 compatible = "wlf,wm8960";
  61                 reg = <0x1a>;
  62                 wlf,shared-lrclk;
  63         };
  64 };
  65
  66 &gdma {
  67         status = "okay";
  68 };
  69
  70 &i2s {
  71         #sound-dai-cells = <0>;
  72         status = "okay";
  73         pinctrl-names = "default";
  74         pinctrl-0 = <&i2s_pins>;
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         mx25l6405d@0 {
  81                 compatible = "mx25l6405d","jedec,spi-nor";
  82                 reg = <0 0>;
  83                 spi-max-frequency = <10000000>;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x0 0x30000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@30000 {
  97                                 label = "u-boot-env";
  98                                 reg = <0x30000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         factory: partition@40000 {
 103                                 label = "factory";
 104                                 reg = <0x40000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@50000 {
 109                                 compatible = "denx,uimage";
 110                                 label = "firmware";
 111                                 reg = <0x50000 0x7b0000>;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &sdhci {
 118         status = "okay";
 119 };
 120
 121 &gmac0 {
 122         mtd-mac-address = <&factory 0x5>;
 123 };
 124
 125 &switch0 {
 126         ports {
 127                 port@0 {
 128                         status = "okay";
 129                         label = "lan1";
 130                 };
 131
 132                 port@1 {
 133                         status = "okay";
 134                         label = "lan2";
 135                 };
 136
 137                 port@2 {
 138                         status = "okay";
 139                         label = "lan3";
 140                 };
 141
 142                 port@3 {
 143                         status = "okay";
 144                         label = "lan4";
 145                 };
 146
 147                 port@4 {
 148                         status = "okay";
 149                         label = "wan";
 150                         mtd-mac-address = <&factory 0x5>;
 151                         mtd-mac-address-increment = <1>;
 152                 };
 153         };
 154 };
 155
 156 &pcie {
 157         status = "okay";
 158 };