ramips: fix MAC address setup for Xiaomi MiWiFi Nano
[oweals/openwrt.git] / target / linux / ramips / dts / mt7621_linksys_re6500.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "linksys,re6500", "mediatek,mt7621-soc";
10         model = "Linksys RE6500";
11
12         aliases {
13                 led-boot = &led_power;
14                 led-failsafe = &led_power;
15                 led-running = &led_power;
16                 led-upgrade = &led_power;
17         };
18
19         chosen {
20                 bootargs = "console=ttyS0,57600";
21         };
22
23         leds {
24                 compatible = "gpio-leds";
25
26                 wifi {
27                         label = "re6500:orange:wifi";
28                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
29                 };
30
31                 led_power: power {
32                         label = "re6500:white:power";
33                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
34                 };
35         };
36
37         keys {
38                 compatible = "gpio-keys";
39
40                 wps {
41                         label = "wps";
42                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
43                         linux,code = <KEY_WPS_BUTTON>;
44                 };
45
46                 reset {
47                         label = "reset";
48                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
49                         linux,code = <KEY_RESTART>;
50                 };
51         };
52 };
53
54 &spi0 {
55         status = "okay";
56
57         m25p80@0 {
58                 compatible = "jedec,spi-nor";
59                 reg = <0>;
60                 spi-max-frequency = <10000000>;
61
62                 partitions {
63                         compatible = "fixed-partitions";
64                         #address-cells = <1>;
65                         #size-cells = <1>;
66
67                         partition@0 {
68                                 label = "u-boot";
69                                 reg = <0x0 0x30000>;
70                                 read-only;
71                         };
72
73                         partition@30000 {
74                                 label = "u-boot-env";
75                                 reg = <0x30000 0x10000>;
76                                 read-only;
77                         };
78
79                         factory: partition@40000 {
80                                 label = "factory";
81                                 reg = <0x40000 0x10000>;
82                                 read-only;
83                         };
84
85                         partition@50000 {
86                                 compatible = "denx,uimage";
87                                 label = "firmware";
88                                 reg = <0x50000 0x7b0000>;
89                         };
90                 };
91         };
92 };
93
94 &pinctrl {
95         state_default: pinctrl0 {
96                 gpio {
97                         ralink,group = "i2c", "uart2", "uart3", "rgmii2";
98                         ralink,function = "gpio";
99                 };
100         };
101 };
102
103 &pcie {
104         status = "okay";
105 };
106
107 &pcie0 {
108         mt76@0,0 {
109                 reg = <0x0000 0 0 0 0>;
110                 mediatek,mtd-eeprom = <&factory 0x0000>;
111                 ieee80211-freq-limit = <5000000 6000000>;
112         };
113 };
114
115 &pcie1 {
116         mt76@0,0 {
117                 reg = <0x0000 0 0 0 0>;
118                 mediatek,mtd-eeprom = <&factory 0x8000>;
119                 ieee80211-freq-limit = <2400000 2500000>;
120         };
121 };
122
123 &ethernet {
124         mtd-mac-address = <&factory 0x2e>;
125 };
126
127 &xhci {
128         status = "disabled";
129 };