target/linux/ramips/dts/mt7621_iodata_wn-gx300gr.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "iodata,wn-gx300gr", "mediatek,mt7621-soc";
  10         model = "I-O DATA WN-GX300GR";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power: power {
  27                         label = "wn-gx300gr:green:power";
  28                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wps {
  32                         label = "wn-gx300gr:green:wps";
  33                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  34                 };
  35         };
  36
  37         keys {
  38                 compatible = "gpio-keys";
  39
  40                 reset {
  41                         label = "reset";
  42                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_RESTART>;
  44                 };
  45
  46                 wps {
  47                         label = "wps";
  48                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_WPS_BUTTON>;
  50                 };
  51
  52                 auto {
  53                         label = "auto";
  54                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  55                         linux,code = <BTN_0>;
  56                         linux,input-type = <EV_SW>;
  57                 };
  58
  59                 custom {
  60                         label = "custom";
  61                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  62                         linux,code = <BTN_0>;
  63                         linux,input-type = <EV_SW>;
  64                 };
  65         };
  66 };
  67
  68 &spi0 {
  69         status = "okay";
  70
  71         m25p80@0 {
  72                 compatible = "jedec,spi-nor";
  73                 reg = <0>;
  74                 spi-max-frequency = <10000000>;
  75
  76                 partitions {
  77                         compatible = "fixed-partitions";
  78                         #address-cells = <1>;
  79                         #size-cells = <1>;
  80
  81                         partition@0 {
  82                                 label = "Bootloader";
  83                                 reg = <0x0 0x30000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@30000 {
  88                                 label = "Config";
  89                                 reg = <0x30000 0x10000>;
  90                                 read-only;
  91                         };
  92
  93                         factory: partition@40000 {
  94                                 label = "factory";
  95                                 reg = <0x40000 0x10000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@50000 {
 100                                 label = "iNIC_rf";
 101                                 reg = <0x50000 0x10000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@60000 {
 106                                 compatible = "denx,uimage";
 107                                 label = "firmware";
 108                                 reg = <0x60000 0x770000>;
 109                         };
 110
 111                         partition@7d0000 {
 112                                 label = "Key";
 113                                 reg = <0x7d0000 0x10000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@7e0000 {
 118                                 label = "backup";
 119                                 reg = <0x7e0000 0x10000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@7f0000 {
 124                                 label = "storage";
 125                                 reg = <0x7f0000 0x10000>;
 126                                 read-only;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &ethernet {
 133         mtd-mac-address = <&factory 0x4>;
 134 };
 135
 136 &pinctrl {
 137         state_default: pinctrl0 {
 138                 gpio {
 139                         ralink,group = "uart2", "uart3", "jtag";
 140                         ralink,function = "gpio";
 141                 };
 142         };
 143 };
 144
 145 &pcie {
 146         status = "okay";
 147 };
 148
 149 &pcie0 {
 150         mt76@0,0 {
 151                 reg = <0x0000 0 0 0 0>;
 152                 mediatek,mtd-eeprom = <&factory 0x0>;
 153         };
 154 };
 155
 156 &xhci {
 157         status = "disabled";
 158 };