target/linux/ramips/dts/mt7621_elecom_wrc-1167ghbk2-s.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
  10         model = "ELECOM WRC-1167GHBK2-S";
  11
  12         aliases {
  13                 led-boot = &led_power_green;
  14                 led-failsafe = &led_power_green;
  15                 led-running = &led_power_green;
  16                 led-upgrade = &led_power_green;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 wlan2g {
  27                         label = "wrc-1167ghbk2-s:white:wlan2g";
  28                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  29                         linux,default-trigger = "phy0radio";
  30                 };
  31
  32                 wlan5g {
  33                         label = "wrc-1167ghbk2-s:white:wlan5g";
  34                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 led_power_green: power_green {
  38                         label = "wrc-1167ghbk2-s:green:power";
  39                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  40                 };
  41
  42                 power_blue {
  43                         label = "wrc-1167ghbk2-s:blue:power";
  44                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  45                 };
  46
  47                 wps {
  48                         label = "wrc-1167ghbk2-s:red:wps";
  49                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  50                 };
  51
  52                 power_red {
  53                         label = "wrc-1167ghbk2-s:red:power";
  54                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  55                 };
  56         };
  57
  58         keys {
  59                 compatible = "gpio-keys";
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  64                         linux,code = <KEY_RESTART>;
  65                 };
  66
  67                 wps {
  68                         label = "wps";
  69                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_WPS_BUTTON>;
  71                 };
  72         };
  73 };
  74
  75 &ethernet {
  76         mtd-mac-address = <&factory 0xe000>;
  77 };
  78
  79 &spi0 {
  80         status = "okay";
  81
  82         m25p80@0 {
  83                 compatible = "jedec,spi-nor";
  84                 reg = <0>;
  85                 spi-max-frequency = <10000000>;
  86
  87                 partitions {
  88                         compatible = "fixed-partitions";
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91
  92                         partition@0 {
  93                                 label = "u-boot";
  94                                 reg = <0x0 0x30000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@30000 {
  99                                 label = "u-boot-env";
 100                                 reg = <0x30000 0x10000>;
 101                                 read-only;
 102                         };
 103
 104                         factory: partition@40000 {
 105                                 label = "factory";
 106                                 reg = <0x40000 0x10000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@50000 {
 111                                 compatible = "denx,uimage";
 112                                 label = "firmware";
 113                                 reg = <0x50000 0xf20000>;
 114                         };
 115
 116                         partition@f70000 {
 117                                 label = "user_data";
 118                                 reg = <0xf70000 0x80000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@ff0000 {
 123                                 label = "NVRAM";
 124                                 reg = <0xff0000 0x10000>;
 125                                 read-only;
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &state_default {
 132         gpio {
 133                 groups = "i2c", "uart3", "jtag", "wdt";
 134                 function = "gpio";
 135         };
 136 };
 137
 138 &pcie {
 139         status = "okay";
 140 };
 141
 142 &pcie0 {
 143         wifi@0,0 {
 144                 compatible = "mediatek,mt76";
 145                 reg = <0x0000 0 0 0 0>;
 146                 mediatek,mtd-eeprom = <&factory 0x0>;
 147                 mtd-mac-address = <&factory 0xe000>;
 148                 mtd-mac-address-increment = <1>;
 149         };
 150 };
 151
 152 &xhci {
 153         status = "disabled";
 154 };