target/linux/ramips/dts/mt7621_buffalo_wsr-600dhp.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc";
  10         model = "Buffalo WSR-600DHP";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power: power {
  27                         label = "wsr-600:green:power";
  28                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 wifi_o {
  32                         label = "wsr-600:orange:wifi";
  33                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 diag {
  37                         label = "wsr-600:orange:diag";
  38                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wifi_g {
  42                         label = "wsr-600:green:wifi";
  43                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 router_o {
  47                         label = "wsr-600:orange:router";
  48                         gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 router_g {
  52                         label = "wsr-600:green:router";
  53                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 internet_o {
  57                         label = "wsr-600:orange:internet";
  58                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 internet_g {
  62                         label = "wsr-600:green:internet";
  63                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         keys {
  68                 compatible = "gpio-keys-polled";
  69                 poll-interval = <20>;
  70
  71                 power {
  72                         label = "power";
  73                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  74                         linux,code = <KEY_POWER>;
  75                 };
  76
  77                 reset {
  78                         label = "reset";
  79                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  80                         linux,code = <KEY_RESTART>;
  81                 };
  82
  83                 aoss {
  84                         label = "aoss";
  85                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_WPS_BUTTON>;
  87                 };
  88
  89                 auto {
  90                         label = "mode";
  91                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  92                         linux,code = <BTN_0>;
  93                         linux,input-type = <EV_SW>;
  94                 };
  95
  96                 ap {
  97                         label = "ap";
  98                         gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
  99                         linux,code = <BTN_0>;
 100                         linux,input-type = <EV_SW>;
 101                 };
 102
 103                 router {
 104                         label = "router";
 105                         gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
 106                         linux,code = <BTN_0>;
 107                         linux,input-type = <EV_SW>;
 108                 };
 109         };
 110
 111         gpio_poweroff {
 112                 compatible = "gpio-poweroff";
 113                 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 114         };
 115 };
 116
 117 &spi0 {
 118         status = "okay";
 119
 120         m25p80@0 {
 121                 compatible = "jedec,spi-nor";
 122                 reg = <0>;
 123                 spi-max-frequency = <10000000>;
 124
 125                 partitions {
 126                         compatible = "fixed-partitions";
 127                         #address-cells = <1>;
 128                         #size-cells = <1>;
 129
 130                         partition@0 {
 131                                 label = "u-boot";
 132                                 reg = <0x0 0x30000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@30000 {
 137                                 label = "u-boot-env";
 138                                 reg = <0x30000 0x10000>;
 139                                 read-only;
 140                         };
 141
 142                         factory: partition@40000 {
 143                                 label = "factory";
 144                                 reg = <0x40000 0x10000>;
 145                                 read-only;
 146                         };
 147
 148                         partition@50000 {
 149                                 compatible = "denx,uimage";
 150                                 label = "firmware";
 151                                 reg = <0x50000 0xfb0000>;
 152                         };
 153                 };
 154         };
 155 };
 156
 157 &pinctrl {
 158         state_default: pinctrl0 {
 159                 gpio {
 160                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
 161                         ralink,function = "gpio";
 162                 };
 163         };
 164 };
 165
 166 &pcie {
 167         status = "okay";
 168 };
 169
 170 &pcie0 {
 171         rt5592@0,0 {
 172                 reg = <0x0000 0 0 0 0>;
 173                 ralink,mtd-eeprom = <&factory 0x8000>;
 174         };
 175 };
 176
 177 &pcie1 {
 178         mt76@0,0 {
 179                 reg = <0x0000 0 0 0 0>;
 180                 mediatek,mtd-eeprom = <&factory 0x0000>;
 181         };
 182 };
 183
 184 &ethernet {
 185         mtd-mac-address = <&factory 0x4>;
 186 };
 187
 188 &xhci {
 189         status = "disabled";
 190 };