ramips: add support for Netgear EX6130
[oweals/openwrt.git] / target / linux / ramips / dts / mt7621_asus_rt-acx5p.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7621.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10         aliases {
11                 led-boot = &led_power;
12                 led-failsafe = &led_power;
13                 led-running = &led_power;
14                 led-upgrade = &led_power;
15         };
16
17         chosen {
18                 bootargs = "console=ttyS0,57600";
19         };
20
21         palmbus: palmbus@1E000000 {
22                 i2c@900 {
23                         status = "okay";
24                 };
25         };
26
27         keys {
28                 compatible = "gpio-keys";
29
30                 reset {
31                         label = "reset";
32                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
33                         linux,code = <KEY_RESTART>;
34                 };
35
36                 wps {
37                         label = "wps";
38                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
39                         linux,code = <KEY_WPS_BUTTON>;
40                 };
41         };
42
43         leds {
44                 compatible = "gpio-leds";
45
46                 led_power: power {
47                         label = "rt-ac85p:blue:power";
48                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
49                 };
50                 wlan2g {
51                         label = "rt-ac85p:blue:wlan2g";
52                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
53                         linux,default-trigger = "phy0radio";
54                 };
55
56                 wlan5g {
57                         label = "rt-ac85p:blue:wlan5g";
58                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
59                         linux,default-trigger = "phy1radio";
60                 };
61         };
62 };
63
64 &sdhci {
65         status = "okay";
66 };
67
68 &nand {
69         status = "okay";
70
71         partitions {
72                 compatible = "fixed-partitions";
73                 #address-cells = <1>;
74                 #size-cells = <1>;
75
76                 partition@0 {
77                         label = "u-boot";
78                         reg = <0x0 0xe0000>;
79                         read-only;
80                 };
81
82                 partition@e0000 {
83                         label = "u-boot-env";
84                         reg = <0xe0000 0x100000>;
85                         read-only;
86                 };
87
88                 factory: partition@1e0000 {
89                         label = "factory";
90                         reg = <0x1e0000 0x100000>;
91                         read-only;
92                 };
93
94                 factory2: partition@2e0000 {
95                         label = "factory2";
96                         reg = <0x2e0000 0x100000>;
97                         read-only;
98                 };
99
100                 partition@3e0000 {
101                         label = "kernel";
102                         reg = <0x3e0000 0x400000>;
103                 };
104
105                 partition@7e0000 {
106                         label = "ubi";
107                         reg = <0x7e0000 0x2e00000>;
108                 };
109
110                 partition@35e0000 {
111                         label = "firmware2";
112                         reg = <0x35e0000 0x3200000>;
113                 };
114         };
115 };
116
117 &pcie {
118         status = "okay";
119 };
120
121 &pcie0 {
122         wifi0: wifi@0,0 {
123                 compatible = "pci14c3,7615";
124                 reg = <0x0000 0 0 0 0>;
125                 mediatek,mtd-eeprom = <&factory 0x0000>;
126                 ieee80211-freq-limit = <2400000 2500000>;
127         };
128 };
129
130 &pcie1 {
131         wifi1: wifi@0,0 {
132                 compatible = "pci14c3,7615";
133                 reg = <0x0000 0 0 0 0>;
134                 mediatek,mtd-eeprom = <&factory 0x8000>;
135                 ieee80211-freq-limit = <5000000 6000000>;
136         };
137 };
138
139 &ethernet {
140         mtd-mac-address = <&factory 0xe000>;
141         mediatek,portmap = "wllll";
142         port@5 {
143                 status = "disabled";
144         };
145 };
146
147 &i2c {
148         status = "disabled";
149 };
150
151 &pinctrl {
152         state_default: pinctrl0 {
153                 gpio {
154                         ralink,group = "uart2", "uart3", "i2c";
155                         ralink,function = "gpio";
156                 };
157         };
158 };