ramips: add support for XiaoYu XY-C5
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620n_zbtlink_zbt-we2026.dts
1 /dts-v1/;
2
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5
6 #include "mt7620n.dtsi"
7
8 / {
9         compatible = "zbtlink,zbt-we2026", "ralink,mt7620n-soc";
10         model = "Zbtlink ZBT-WE2026";
11
12         aliases {
13                 led-boot = &led_power;
14                 led-failsafe = &led_power;
15                 led-running = &led_power;
16                 led-upgrade = &led_power;
17         };
18
19         chosen {
20                 bootargs = "console=ttyS0,115200";
21         };
22
23         leds {
24                 compatible = "gpio-leds";
25
26                 led_power: power {
27                         label = "zbt-we2026:red:power";
28                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
29                 };
30
31                 wlan {
32                         label = "zbt-we2026:green:wlan";
33                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
34                 };
35         };
36
37         keys {
38                 compatible = "gpio-keys-polled";
39                 poll-interval = <20>;
40
41                 reset {
42                         label = "reset";
43                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
44                         linux,code = <KEY_RESTART>;
45                 };
46         };
47 };
48
49 &gpio1 {
50         status = "okay";
51 };
52
53 &gpio3 {
54         status = "okay";
55 };
56
57 &spi0 {
58         status = "okay";
59
60         en25q64@0 {
61                 compatible = "jedec,spi-nor";
62                 reg = <0>;
63                 spi-max-frequency = <10000000>;
64
65                 partitions {
66                         compatible = "fixed-partitions";
67                         #address-cells = <1>;
68                         #size-cells = <1>;
69
70                         partition@0 {
71                                 label = "u-boot";
72                                 reg = <0x0 0x30000>;
73                                 read-only;
74                         };
75
76                         partition@30000 {
77                                 label = "u-boot-env";
78                                 reg = <0x30000 0x10000>;
79                                 read-only;
80                         };
81
82                         factory: partition@40000 {
83                                 label = "factory";
84                                 reg = <0x40000 0x10000>;
85                                 read-only;
86                         };
87
88                         partition@50000 {
89                                 compatible = "denx,uimage";
90                                 label = "firmware";
91                                 reg = <0x50000 0x760000>;
92                         };
93                 };
94         };
95 };
96
97 &ethernet {
98         mtd-mac-address = <&factory 0x4>;
99         mediatek,portmap = "wllll";
100 };
101
102 &wmac {
103         ralink,mtd-eeprom = <&factory 0>;
104 };
105
106 &pinctrl {
107         state_default: pinctrl0 {
108                 default {
109                         ralink,group = "i2c", "spi refclk", "wled";
110                         ralink,function = "gpio";
111                 };
112         };
113 };