ramips: clean and improve MAC address setup in 02_network
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620n_vonets_var11n-300.dts
1 /dts-v1/;
2
3 #include "mt7620n.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
10         model = "Vonets VAR11N-300";
11
12         aliases {
13                 led-boot = &led_system;
14                 led-failsafe = &led_system;
15                 led-running = &led_system;
16                 led-upgrade = &led_system;
17         };
18
19         leds {
20                 compatible = "gpio-leds";
21
22                 led_system: system {
23                         label = "var11n-300:blue:system";
24                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
25                 };
26         };
27
28         keys {
29                 compatible = "gpio-keys-polled";
30                 poll-interval = <20>;
31
32                 reset {
33                         label = "reset";
34                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
35                         linux,code = <KEY_RESTART>;
36                 };
37         };
38 };
39
40 &gpio0 {
41         status = "okay";
42 };
43
44 &spi0 {
45         status = "okay";
46
47         m25p80@0 {
48                 compatible = "jedec,spi-nor";
49                 reg = <0>;
50                 spi-max-frequency = <10000000>;
51
52                 partitions {
53                         compatible = "fixed-partitions";
54                         #address-cells = <1>;
55                         #size-cells = <1>;
56
57                         partition@0 {
58                                 label = "u-boot";
59                                 reg = <0x0 0x30000>;
60                                 read-only;
61                         };
62
63                         partition@30000 {
64                                 label = "u-boot-env";
65                                 reg = <0x30000 0x10000>;
66                                 read-only;
67                         };
68
69                         factory: partition@40000 {
70                                 label = "factory";
71                                 reg = <0x40000 0x10000>;
72                                 read-only;
73                         };
74
75                         partition@50000 {
76                                 compatible = "denx,uimage";
77                                 label = "firmware";
78                                 reg = <0x50000 0x3b0000>;
79                         };
80                 };
81         };
82 };
83
84 &ethernet {
85         mtd-mac-address = <&factory 0x4>;
86         mediatek,portmap = "llllw";
87 };
88
89 &wmac {
90         ralink,mtd-eeprom = <&factory 0>;
91 };
92
93 &pinctrl {
94         state_default: pinctrl0 {
95                 default {
96                         ralink,group = "i2c";
97                         ralink,function = "gpio";
98                 };
99         };
100 };