target/linux/ramips/dts/mt7620n_kingston_mlwg2.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "kingston,mlwg2", "ralink,mt7620n-soc";
  10         model = "Kingston MLWG2";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_system: system {
  23                         label = "mlwg2:blue:system";
  24                         gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 wifi {
  28                         label = "mlwg2:blue:wifi";
  29                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  30                 };
  31         };
  32
  33         keys {
  34                 compatible = "gpio-keys";
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RESTART>;
  40                 };
  41
  42                 system {
  43                         label = "system";
  44                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RFKILL>;
  46                 };
  47         };
  48 };
  49
  50 &gpio0 {
  51         status = "okay";
  52 };
  53
  54 &gpio2 {
  55         status = "okay";
  56 };
  57
  58 &gpio3 {
  59         status = "okay";
  60 };
  61
  62 &spi0 {
  63         status = "okay";
  64
  65         m25p80@0 {
  66                 compatible = "jedec,spi-nor";
  67                 reg = <0>;
  68                 spi-max-frequency = <10000000>;
  69
  70                 partitions {
  71                         compatible = "fixed-partitions";
  72                         #address-cells = <1>;
  73                         #size-cells = <1>;
  74
  75                         partition@0 {
  76                                 label = "u-boot";
  77                                 reg = <0x0 0x30000>;
  78                                 read-only;
  79                         };
  80
  81                         partition@30000 {
  82                                 label = "u-boot-env";
  83                                 reg = <0x30000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         factory: partition@40000 {
  88                                 label = "factory";
  89                                 reg = <0x40000 0x10000>;
  90                                 read-only;
  91                         };
  92
  93                         partition@50000 {
  94                                 compatible = "denx,uimage";
  95                                 label = "firmware";
  96                                 reg = <0x50000 0xf60000>;
  97                         };
  98
  99                         partition@fb0000 {
 100                                 label = "user-config";
 101                                 reg = <0xfb0000 0x50000>;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &ehci {
 108         status = "okay";
 109 };
 110
 111 &ohci {
 112         status = "okay";
 113 };
 114
 115 &ethernet {
 116         mtd-mac-address = <&factory 0x4>;
 117         mediatek,portmap = "wllll";
 118 };
 119
 120 &wmac {
 121         ralink,mtd-eeprom = <&factory 0>;
 122 };
 123
 124 &state_default {
 125         default {
 126                 groups = "i2c", "ephy", "wled";
 127                 function = "gpio";
 128         };
 129 };