target/linux/ramips/dts/mt7620a_zte_q7.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zte,q7", "ralink,mt7620a-soc";
  10         model = "ZTE Q7";
  11
  12         aliases {
  13                 led-boot = &led_status_blue;
  14                 led-failsafe = &led_status_blue;
  15                 led-running = &led_status_blue;
  16                 led-upgrade = &led_status_blue;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 statred {
  23                         label = "zte-q7:red:status";
  24                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 led_status_blue: statblue {
  28                         label = "zte-q7:blue:status";
  29                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  30                 };
  31         };
  32
  33         keys {
  34                 compatible = "gpio-keys";
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RESTART>;
  40                 };
  41         };
  42 };
  43
  44 &gpio0 {
  45         status = "okay";
  46 };
  47
  48 &gpio1 {
  49         status = "okay";
  50 };
  51
  52 &spi0 {
  53         status = "okay";
  54
  55         m25p80@0 {
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 spi-max-frequency = <10000000>;
  59
  60                 partitions {
  61                         compatible = "fixed-partitions";
  62                         #address-cells = <1>;
  63                         #size-cells = <1>;
  64
  65                         partition@0 {
  66                                 label = "u-boot";
  67                                 reg = <0x0 0x30000>;
  68                                 read-only;
  69                         };
  70
  71                         partition@30000 {
  72                                 label = "u-boot-env";
  73                                 reg = <0x30000 0x10000>;
  74                                 read-only;
  75                         };
  76
  77                         factory: partition@40000 {
  78                                 label = "factory";
  79                                 reg = <0x40000 0x10000>;
  80                                 read-only;
  81                         };
  82
  83                         partition@50000 {
  84                                 compatible = "denx,uimage";
  85                                 label = "firmware";
  86                                 reg = <0x50000 0x7b0000>;
  87                         };
  88                 };
  89         };
  90 };
  91
  92 &state_default {
  93         gpio {
  94                 ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled";
  95                 ralink,function = "gpio";
  96         };
  97 };
  98
  99 &ethernet {
 100         mtd-mac-address = <&factory 0x4>;
 101         mediatek,portmap = "wllll";
 102 };
 103
 104 &wmac {
 105         ralink,mtd-eeprom = <&factory 0>;
 106 };
 107
 108 &sdhci {
 109         status = "okay";
 110 };
 111
 112 &ehci {
 113         status = "okay";
 114 };
 115
 116 &ohci {
 117         status = "okay";
 118 };
 119
 120 &gsw {
 121         mediatek,port4 = "ephy";
 122 };