target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826-e.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7620a_zbtlink_zbt-we826.dtsi"
   5
   6 / {
   7         compatible = "zbtlink,zbt-we826-e", "zbtlink,zbt-we826", "ralink,mt7620a-soc";
   8         model = "Zbtlink ZBT-WE826-E";
   9
  10         /delete-node/ leds;
  11
  12         leds {
  13                 compatible = "gpio-leds";
  14
  15                 led_power: gsm {
  16                         label = "zbt-we826-e:blue:gsm";
  17                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 signal {
  21                         label = "zbt-we826-e:green:signal";
  22                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 sim {
  26                         label = "zbt-we826-e:red:sim";
  27                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 air {
  31                         label = "zbt-we826-e:red:wifi";
  32                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35 };
  36
  37 &spi0 {
  38         status = "okay";
  39
  40         flash@0 {
  41                 compatible = "jedec,spi-nor";
  42                 reg = <0>;
  43                 spi-max-frequency = <10000000>;
  44
  45                 partitions {
  46                         compatible = "fixed-partitions";
  47                         #address-cells = <1>;
  48                         #size-cells = <1>;
  49
  50                         partition@0 {
  51                                 label = "u-boot";
  52                                 reg = <0x0 0x30000>;
  53                                 read-only;
  54                         };
  55
  56                         partition@30000 {
  57                                 label = "u-boot-env";
  58                                 reg = <0x30000 0x10000>;
  59                                 read-only;
  60                         };
  61
  62                         factory: partition@40000 {
  63                                 label = "factory";
  64                                 reg = <0x40000 0x10000>;
  65                                 read-only;
  66                         };
  67
  68                         firmware: partition@50000 {
  69                                 compatible = "denx,uimage";
  70                                 label = "firmware";
  71                                 reg = <0x50000 0x1fb0000>;
  72                         };
  73                 };
  74         };
  75 };
  76
  77 &pinctrl {
  78         state_default: pinctrl0 {
  79                 default {
  80                         ralink,group = "i2c", "uartf", "wled";
  81                         ralink,function = "gpio";
  82                 };
  83         };
  84 };