target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
  10         model = "ZBT-APE522II";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 sys1 {
  20                         label = "zbt-ape522ii:green:sys1";
  21                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 sys2 {
  25                         label = "zbt-ape522ii:green:sys2";
  26                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 sys3 {
  30                         label = "zbt-ape522ii:green:sys3";
  31                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 sys4 {
  35                         label = "zbt-ape522ii:green:sys4";
  36                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wlan2g4 {
  40                         label = "zbt-ape522ii:green:wlan2g4";
  41                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys-polled";
  47                 poll-interval = <20>;
  48
  49                 reset {
  50                         label = "reset";
  51                         gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  52                         linux,code = <KEY_RESTART>;
  53                 };
  54         };
  55 };
  56
  57 &gpio0 {
  58         status = "okay";
  59 };
  60
  61 &gpio1 {
  62         status = "okay";
  63 };
  64
  65 &gpio2 {
  66         status = "okay";
  67 };
  68
  69 &gpio3 {
  70         status = "okay";
  71 };
  72
  73 &spi0 {
  74         status = "okay";
  75
  76         m25p80@0 {
  77                 compatible = "jedec,spi-nor";
  78                 reg = <0>;
  79                 spi-max-frequency = <10000000>;
  80
  81                 partitions {
  82                         compatible = "fixed-partitions";
  83                         #address-cells = <1>;
  84                         #size-cells = <1>;
  85
  86                         partition@0 {
  87                                 label = "u-boot";
  88                                 reg = <0x0 0x30000>;
  89                         };
  90
  91                         partition@30000 {
  92                                 label = "u-boot-env";
  93                                 reg = <0x30000 0x10000>;
  94                                 read-only;
  95                         };
  96
  97                         factory: partition@40000 {
  98                                 label = "factory";
  99                                 reg = <0x40000 0x10000>;
 100                                 read-only;
 101                         };
 102
 103                         partition@50000 {
 104                                 compatible = "denx,uimage";
 105                                 label = "firmware";
 106                                 reg = <0x50000 0xf80000>;
 107                         };
 108                 };
 109         };
 110 };
 111
 112 &ethernet {
 113         pinctrl-names = "default";
 114         pinctrl-0 = <&ephy_pins>;
 115         mtd-mac-address = <&factory 0x4>;
 116         mediatek,portmap = "wllll";
 117 };
 118
 119 &wmac {
 120         ralink,mtd-eeprom = <&factory 0>;
 121         pinctrl-names = "default";
 122         pinctrl-0 = <&pa_pins>;
 123 };
 124
 125 &pcie {
 126         status = "okay";
 127 };
 128
 129 &pcie0 {
 130         mt76@0,0 {
 131                 reg = <0x0000 0 0 0 0>;
 132                 mediatek,mtd-eeprom = <&factory 0x8000>;
 133                 ieee80211-freq-limit = <5000000 6000000>;
 134         };
 135 };
 136
 137 &pinctrl {
 138         state_default: pinctrl0 {
 139                 gpio {
 140                         ralink,group = "wled", "i2c", "uartf", "wdt";
 141                         ralink,function = "gpio";
 142                 };
 143         };
 144 };