ramips: add support for XiaoYu XY-C5
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620a_xiaomi_miwifi-mini.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
10         model = "Xiaomi MiWiFi Mini";
11
12         aliases {
13                 led-boot = &led_blue;
14                 led-failsafe = &led_blue;
15                 led-running = &led_blue;
16                 led-upgrade = &led_blue;
17                 label-mac-device = &ethernet;
18         };
19
20         chosen {
21                 bootargs = "console=ttyS0,115200";
22         };
23
24         leds {
25                 compatible = "gpio-leds";
26
27                 led_blue: blue {
28                         label = "miwifi-mini:blue:status";
29                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
30                         default-state = "on";
31                 };
32
33                 yellow {
34                         label = "miwifi-mini:yellow:status";
35                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
36                 };
37
38                 red {
39                         label = "miwifi-mini:red:status";
40                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
41                 };
42         };
43
44         keys {
45                 compatible = "gpio-keys-polled";
46                 poll-interval = <20>;
47
48                 reset {
49                         label = "reset";
50                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
51                         linux,code = <KEY_RESTART>;
52                 };
53         };
54 };
55
56 &gpio0 {
57         status = "okay";
58 };
59
60 &gpio1 {
61         status = "okay";
62 };
63
64 &gpio2 {
65         status = "okay";
66 };
67
68 &spi0 {
69         status = "okay";
70
71         m25p80@0 {
72                 compatible = "jedec,spi-nor";
73                 reg = <0>;
74                 spi-max-frequency = <10000000>;
75
76                 partitions {
77                         compatible = "fixed-partitions";
78                         #address-cells = <1>;
79                         #size-cells = <1>;
80
81                         partition@0 {
82                                 label = "u-boot";
83                                 reg = <0x0 0x30000>;
84                         };
85
86                         partition@30000 {
87                                 label = "u-boot-env";
88                                 reg = <0x30000 0x10000>;
89                                 read-only;
90                         };
91
92                         factory: partition@40000 {
93                                 label = "factory";
94                                 reg = <0x40000 0x10000>;
95                                 read-only;
96                         };
97
98                         partition@50000 {
99                                 compatible = "denx,uimage";
100                                 label = "firmware";
101                                 reg = <0x50000 0xf80000>;
102                         };
103
104                         partition@fd0000 {
105                                 label = "crash";
106                                 reg = <0xfd0000 0x10000>;
107                         };
108
109                         partition@fe0000 {
110                                 label = "reserved";
111                                 reg = <0xfe0000 0x10000>;
112                                 read-only;
113                         };
114
115                         partition@ff0000 {
116                                 label = "Bdata";
117                                 reg = <0xff0000 0x10000>;
118                         };
119                 };
120         };
121 };
122
123 &ehci {
124         status = "okay";
125 };
126
127 &ohci {
128         status = "okay";
129 };
130
131 &ethernet {
132         pinctrl-names = "default";
133         pinctrl-0 = <&ephy_pins>;
134         mtd-mac-address = <&factory 0x28>;
135         mediatek,portmap = "llllw";
136 };
137
138 &wmac {
139         ralink,mtd-eeprom = <&factory 0>;
140         pinctrl-names = "default";
141         pinctrl-0 = <&pa_pins>;
142 };
143
144 &pcie {
145         status = "okay";
146 };
147
148 &pcie0 {
149         mt76@0,0 {
150                 reg = <0x0000 0 0 0 0>;
151                 mediatek,mtd-eeprom = <&factory 0x8000>;
152                 ieee80211-freq-limit = <5000000 6000000>;
153         };
154 };
155
156 &pinctrl {
157         state_default: pinctrl0 {
158                 gpio {
159                         ralink,group = "i2c", "rgmii1";
160                         ralink,function = "gpio";
161                 };
162         };
163 };