ramips: fix MAC address setup for Xiaomi MiWiFi Nano
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620a_tplink_archer.dtsi
1 #include "mt7620a.dtsi"
2
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/gpio/gpio.h>
5
6 / {
7         chosen {
8                 bootargs = "console=ttyS0,115200";
9         };
10
11         keys {
12                 compatible = "gpio-keys";
13
14                 reset {
15                         label = "reset";
16                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
17                         linux,code = <KEY_RESTART>;
18                 };
19
20                 rfkill {
21                         label = "rfkill";
22                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
23                         linux,code = <KEY_RFKILL>;
24                 };
25         };
26 };
27
28 &gpio1 {
29         status = "okay";
30 };
31
32 &gpio2 {
33         status = "okay";
34 };
35
36 &gpio3 {
37         status = "okay";
38 };
39
40 &spi0 {
41         status = "okay";
42
43         m25p80@0 {
44                 compatible = "jedec,spi-nor";
45                 reg = <0>;
46                 spi-max-frequency = <10000000>;
47
48                 partitions {
49                         compatible = "fixed-partitions";
50                         #address-cells = <1>;
51                         #size-cells = <1>;
52
53                         partition@0 {
54                                 label = "u-boot";
55                                 reg = <0x0 0x20000>;
56                                 read-only;
57                         };
58
59                         partition@20000 {
60                                 compatible = "tplink,firmware";
61                                 label = "firmware";
62                                 reg = <0x20000 0x7a0000>;
63                         };
64
65                         partition@7c0000 {
66                                 label = "config";
67                                 reg = <0x7c0000 0x10000>;
68                                 read-only;
69                         };
70
71                         rom: partition@7d0000 {
72                                 label = "rom";
73                                 reg = <0x7d0000 0x10000>;
74                                 read-only;
75                         };
76
77                         partition@7e0000 {
78                                 label = "romfile";
79                                 reg = <0x7e0000 0x10000>;
80                                 read-only;
81                         };
82
83                         radio: partition@7f0000 {
84                                 label = "radio";
85                                 reg = <0x7f0000 0x10000>;
86                                 read-only;
87                         };
88                 };
89         };
90 };
91
92 &ethernet {
93         pinctrl-names = "default";
94         mtd-mac-address = <&rom 0xf100>;
95         mediatek,portmap = "wllll";
96 };
97
98 &ehci {
99         status = "okay";
100 };
101
102 &ohci {
103         status = "okay";
104 };
105
106 &gsw {
107         mediatek,port4 = "ephy";
108 };
109
110 &wmac {
111         ralink,mtd-eeprom = <&radio 0x0>;
112 };
113
114 &pcie {
115         status = "okay";
116 };
117
118 &pcie0 {
119         wifi: mt76@0,0 {
120                 reg = <0x0000 0 0 0 0>;
121                 mediatek,mtd-eeprom = <&radio 0x8000>;
122                 ieee80211-freq-limit = <5000000 6000000>;
123         };
124 };