ramips: add support for XiaoYu XY-C5
[oweals/openwrt.git] / target / linux / ramips / dts / mt7620a_planex_mzk-750dhp.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9         compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
10         model = "Planex MZK-750DHP";
11
12         aliases {
13                 led-boot = &led_power;
14                 led-failsafe = &led_power;
15                 led-running = &led_power;
16                 led-upgrade = &led_power;
17         };
18
19         leds {
20                 compatible = "gpio-leds";
21
22                 wps {
23                         label = "mzk-750dhp:green:wps";
24                         gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
25                 };
26
27                 led_power: power {
28                         label = "mzk-750dhp:green:power";
29                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
30                 };
31
32                 wlan5g {
33                         label = "mzk-750dhp:green:wlan5g";
34                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
35                 };
36         };
37
38         keys {
39                 compatible = "gpio-keys-polled";
40                 poll-interval = <20>;
41
42                 s1 {
43                         label = "reset";
44                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
45                         linux,code = <KEY_RESTART>;
46                 };
47
48                 s2 {
49                         label = "wps";
50                         gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
51                         linux,code = <KEY_WPS_BUTTON>;
52                 };
53         };
54 };
55
56 &gpio1 {
57         status = "okay";
58 };
59
60 &gpio2 {
61         status = "okay";
62 };
63
64 &spi0 {
65         status = "okay";
66
67         m25p80@0 {
68                 compatible = "jedec,spi-nor";
69                 reg = <0>;
70                 spi-max-frequency = <10000000>;
71
72                 partitions {
73                         compatible = "fixed-partitions";
74                         #address-cells = <1>;
75                         #size-cells = <1>;
76
77                         partition@0 {
78                                 label = "u-boot";
79                                 reg = <0x0 0x30000>;
80                                 read-only;
81                         };
82
83                         partition@30000 {
84                                 label = "u-boot-env";
85                                 reg = <0x30000 0x10000>;
86                                 read-only;
87                         };
88
89                         factory: partition@40000 {
90                                 label = "factory";
91                                 reg = <0x40000 0x10000>;
92                                 read-only;
93                         };
94
95                         partition@50000 {
96                                 compatible = "denx,uimage";
97                                 label = "firmware";
98                                 reg = <0x50000 0x7b0000>;
99                         };
100                 };
101         };
102 };
103
104 &pinctrl {
105         state_default: pinctrl0 {
106                 gpio {
107                         ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
108                         ralink,function = "gpio";
109                 };
110         };
111 };
112
113 &ethernet {
114         pinctrl-names = "default";
115         pinctrl-0 = <&ephy_pins>;
116         mtd-mac-address = <&factory 0x4>;
117         mediatek,portmap = "llllw";
118 };
119
120 &gsw {
121         mediatek,port4 = "ephy";
122 };
123
124 &wmac {
125         ralink,mtd-eeprom = <&factory 0>;
126 };
127
128 &pcie {
129         status = "okay";
130 };
131
132 &pcie0 {
133         mt76@0,0 {
134                 reg = <0x0000 0 0 0 0>;
135                 mediatek,mtd-eeprom = <&factory 0x8000>;
136         };
137 };